How to Set Router Bit Height Quickly with Simple Setup Blocks
Setting up a router bit can sometimes take longer than making the cuts. That's especially true with specialized bits that require precise height adjustments. But there's a simple way to eliminate much of the trial and error. With a few scraps of wood, you can create handy router bit setup blocks that make future adjustments faster, easier, and more accurate.
In the video above, Woodsmith's Phil Huber demonstrates how to make these simple setup gauges for a drawer joint router bit and a chamfer bit. Once you've dialed in the perfect setting, a setup block lets you return to that same bit height in seconds.
Why Use Router Bit Setup Blocks?
Getting a router bit set to the correct height often involves making a test cut, checking the results, adjusting the bit, and repeating the process until everything fits just right.
For some router bits, that's a necessary part of the initial setup. But once you've found the correct setting, there's no reason to start from scratch the next time you use the bit.
A router bit setup block acts as a physical reference for a particular bit height. By routing the profile into a scrap piece of wood, you create a gauge that matches the cutter's position.
The next time you install that bit, simply use the setup block to establish the same height without making multiple test cuts.
It's a quick woodworking trick that saves time and helps produce consistent results.
How to Make a Router Bit Setup Block
Making a setup block is simple, and you probably already have everything you need in your scrap bin.
Step 1: Dial In the Router Bit Height
Start by installing the router bit in your router table and adjusting it to the correct cutting height.
For a specialized bit, such as a drawer joint router bit, this may require a few test cuts to achieve the proper fit.
Once you're satisfied with the results, leave the bit at that setting.
Step 2: Rout the Profile into Scrap Wood
Choose a small piece of scrap wood that's large enough to handle safely and provides a clear reference surface.
With the router bit properly adjusted, rout its profile into the scrap. The resulting cut captures the exact height and position of the cutter.
This profile becomes your setup gauge for future use.
Step 3: Use the Block for Future Router Setups
The next time you need that router bit, install it in the router table and disconnect power before checking the setup.
Position the setup block beside the bit and adjust the router height until the cutters align with the profile in the block.
Once everything lines up, you're ready to make a test cut to confirm the setting before routing your project parts.
Instead of spending several minutes making repeated adjustments, you can get close to the correct setting in seconds.
Make a Setup Gauge for Chamfer Router Bits
The same technique works with simpler router bits, too.
A chamfer bit is a good example because changing the bit height changes the size of the chamfer cut along the edge of a board.
Rather than making a separate setup block for every chamfer size, Phil creates a single block with several different chamfer profiles.
Each profile represents a chamfer size he uses regularly.
When it's time to set up the router table, he selects the desired profile, positions the block next to the bit, and adjusts the height until the cutter matches.
This makes it easy to repeat common chamfer sizes without measuring or making a series of test cuts every time.
Tips for Making Accurate Router Setup Gauges
A few simple details will make your setup blocks more useful over time.
- Use stable scrap wood. Choose straight, flat stock that provides a reliable reference surface.
- Label each block. Write the router bit name or size on the block so you can identify it quickly.
- Mark multiple settings. For bits like chamfer cutters, include several commonly used profiles on one block.
- Keep the blocks organized. Store your setup gauges with your router bits so they're easy to find.
- Check the setup before cutting. Setup blocks provide a repeatable starting point, but a test cut is still worthwhile before machining project parts.
Always disconnect the router from power before positioning a setup block near the cutter or making adjustments.
Turn Scrap Wood into Useful Router Table Accessories
Some of the best woodworking shop accessories are also the simplest. Router bit setup blocks don't require expensive hardware or complicated construction. They're made from scraps you already have, and each one can save time whenever you return to a familiar router bit.
Whether you're cutting drawer joints, adding chamfers, or working with other specialized router bits, these small setup gauges make it easier to achieve accurate, repeatable results.
Once you start making them, you'll probably find yourself keeping a collection of setup blocks right alongside your router bits.
Learn More Router Table Techniques
Want to get more from your router table? Woodsmith's Router Table Basics online course covers the fundamentals of router table setup and operation, along with practical techniques for making accurate cuts. Build the skills to tackle everything from simple home improvement projects to fine furniture.
SIGN UP FOR THE ONLINE COURSE: Explore our Router Table Basics course to learn more.




