Wobbly and unstable furniture can be a major nuisance in your everyday life. Be it a chair that loses balance every time you try to sit on it or be it a table that keeps on wobbling whenever you place anything on it, furniture that’s not balanced and level can be a cause of frequent frustration and annoyance. Moreover, furniture that is not sufficiently leveled can also be dangerous as it might cause injuries in the worst of scenarios. Fortunately, there’s a very convenient and easy solution to deal with wobbly and unstable furniture, allowing you to maximize the life of your furniture: a furniture leveler. However, picking the right kind of furniture leveler is no easy feat. To help you out, we have listed below the best furniture levelers of 2023, along with a buying guide so you can make an informed purchase decision.
Furniture usually becomes unleveled due to one or more of its supporting legs becoming uneven. While uneven furniture is sometimes a manufacturing fault, most of the time it is the usage of the furniture that causes it to become rugged, lopsided, and eventually uneven. Since furniture is an everyday household item, it is prone to wear and tear and it is a very common occurrence. Levelers can be installed into the uneven sides of the furniture, in order to restore the functionality of the piece. Not only would these products provide a stable base for your furniture, but they would also help you protect your flooring from skid marks that uneven furniture can cause.
While you can usually buy these at home improvement stores, you don’t have the benefit of customer reviews at home improvement stores. This is where buying these levelers online comes in handy.
Furniture levelers come in tons of different types, designs, and materials and you need to make sure that you’re choosing the one that fits your requirements. The t-nut and shims are the two most common and practical furniture leveler designs available in the market. While the former is more useful for furniture that you can drill a hole in, the latter comes in handy for furniture that you cannot alter, or for antique furniture.
The t-nut furniture levelers are designed to be installed into the feet of any piece of furniture. While the installation process is simple and straightforward, it does require some workmanship and subsequent efforts. This type of furniture leveler can only be installed by drilling a hole through the feet of any piece of furniture and you will have to screw in and/or hammer in the t-nut leveler into the furniture. Most of these products are quite similar in terms of their design and practicality.
This type of furniture leveler is usually considered as a more permanent fix for your uneven furniture, given that once you’ve installed it into a piece of furniture, it does not come out on its own. The T-nut levelers are also commonly used as replacement feet for furniture or as height-increasing feet for furniture that might be too short for usage.
Shims, also known as wedges, are another commonly utilized type of leveler for furniture. Shims are usually considered a more convenient and quick fix to level furniture, as installing this product is incredibly easy. Given the design of this product, you can simply slide it under the uneven feet of your furniture and this product will do what it’s supposed to do.
Leveling shims are usually made of a flexible and unbreakable material that can be customized as per the size requirements of your furniture. Contrary to the t-nut design, this product is not a permanent fix by nature, as you can always alter and adjust it as per your needs. A lot of furniture that you cannot drill a hole in, like antique furniture, can be stabilized and fixed using these very convenient leveling shims.
While both of these types of levelers are highly practical, your decision should be based on the type of furniture that you’re dealing with.
Different products have varying maximum height adjustment limits. While most furniture levelers can increase the height by up to 1.5 inches, you can certainly find a product that is capable of greater height adjustment, depending upon your requirements.
The t-nut levelers usually come with different height adjustment capacities and if you’re looking to stabilize a higher degree of unevenness, you can easily find a product that is capable of doing so.
The shims are highly customizable, which means that you can stack them together to form a hedge, as high as you want. Of course, you’ll have to be careful enough not to compromise on the stability by stacking a lot of shims on top of each other.
These items can certainly make your life easier by helping you level furniture, saving you a lot of money that would’ve been spent on fixing or replacing the entire furniture. With tons of different options available in the market, all you need to do is find the right leveler for your household or commercial usage, taking into consideration the factors and features that have been discussed above.
There are thousands of levelers out there but not all of them would be good enough for you. Here are the most important things that you should look out for while purchasing the right furniture levelers:
Durability is perhaps one of the most important factors that you need to consider while buying a product to level furniture. If the product that you opt for isn’t durable enough, the leveler would not serve its purpose and would also become an injury risk if it is prone to breaking apart under heavy-duty furniture.
A product with decent build quality will support greater weights and would last much longer, which is exactly what you should be looking for.
Since furniture is rarely standardized and most of it differs with regards to its size, type, and shape, it is important that you opt for a leveler that can be customized or that has adjustable legs in accordance with your requirements.
The T-nut furniture levelers usually have adjustable legs for different heights, depending upon the configurations of the specific product. On the other hand, the shims are also customizable as they can be cut down into smaller pieces and/or can be stacked together if need be.
To learn how to adjust and use your levelers, check out this video from Bent’s Woodworking and More:
Lastly, it is also a good idea to take a look at the bottom surface of the product that you’re purchasing. The right leveler should ideally come with a padded bottom surface, in order to ensure that the product does not damage your floor. Going for the wrong product can leave scratches and skid marks on your flooring, which are very difficult to get rid of.
The wobble fixer shims by Metric USA are arguably among the best solutions out there for uneven furniture. These shims are made out of fabric material and are easy to cut, customize, and install in accordance with your requirements. Besides being completely customizable, the wobble fixer is flexible and stackable, which means that it can be used for just about any piece of furniture and it can be adjusted for any degree of unevenness that your furniture might have.
This is a highly practical solution for wobbly furniture, as it can be used indoors as well as outdoors. The practicality of this product isn’t restricted to household usage, as it is equally useful for commercial purposes as well.
The heavy-duty tee nut furniture leveler by HanKun is a great furniture leveler that does its job exactly the way it is supposed to. This product can be used to level and adjust the height of any commonly used piece of furniture. By design, this product includes a lock nut to stabilize furniture, even if it’s heavy-duty. The base of this product is made out of TPR material, which ensures that you can drag your furniture without leaving marks, helping you protect your flooring as well. Moreover, the product has an elegant silver appearance and it is plated with a steel nickel cover shell, making it resistant to abrasion and corrosion.
Furniture levelers by Socipoz is a very handy product if you’re looking for a reliable furniture leveler. The design of the product is simple, which makes the installation easier. This furniture leveler can be installed into any piece of furniture and all you need to do is hammer the insert nut into the uneven bottom of a piece of furniture and screw the lever into the furniture. Once the levers are in the right position, you can adjust the height of your furniture and stabilize it. These furniture levers are quite sturdy and can support heavy-duty furniture and can be used to adjust the height of furniture by up to 1.5 inches.
Furniture levelers by clear style are amongst the finest options available as far as furniture levelers are concerned. Made of 100% solid steel and a thick high-density nylon base, these furniture levelers can certainly help you stabilize your wobbly furniture. This product is designed to fit just about any piece of furniture that’s placed in your home and its sturdy build-quality provides durability, ensuring that it can withstand even heavy-duty furniture and help you stabilize it.
Furniture levelers by clear style come with a modern design, making this product appropriate for use at home, restaurants, offices, schools, and the outdoors.
The furniture levelers by Huayy can certainly solve all of your problems revolving around uneven and unbalanced furniture. This product allows you to stabilize and level any piece of furniture that is not stable enough. Moreover, you can also use this to increase the height of a piece of furniture, making it a very practical and useful product. These furniture levelers are highly durable and can support medium to heavy-duty furniture.
Plastic shims by Superus is a highly convenient and practical product that can be used to level your unbalanced furniture. The leveling shims by Superus are made of TPE material, making them flexible enough to be adjusted as per your requirements. If the degree of unevenness is higher, you can even stack these shims together to achieve the height that you require. This product is strong and durable, ensuring that it can support large weights without breaking down.
Moreover, the grooved anti-slip bottom is a part of the product’s design, allowing you to use this product on any surface, without the risk of it slipping away or damaging your floor.
These table shims by Yarkor are amongst the best furniture leveling products that you can find. Made of soft TPU material, this product does not have any adverse effects on the health of your family or the material of your furniture. Whilst being entirely safe for usage, this product is also highly durable and can endure weights up to 22,000 lbs, without getting damaged. This product is also customizable, as you can cut it down as per your size requirements, or stack multiple pieces to create a higher wedge. These table shims are equipped with anti-slip bottom, ensuring that it stays in its place.
A: Depending upon the type of furniture leveler that you’ve purchased, you might need to drill a hole into the feet of your furniture to install the product.
A: Absolutely not. If you’ve followed the instructions and installed a furniture leveling product properly, it will not damage the furniture.
A: As discussed above, the design of the product should ensure that the floor does not get damaged. A good quality furniture leveler would have its bottom surface padded with a softer material to protect the floor from scratches and marks.
A: Most heavy-duty T-nut furniture levelers are capable of supporting up to 100 lbs, which is often enough for any piece of furniture.
The Woodsmith Review Team’s product reviews and in-depth guides are here to help you choose the best tools and gear to build great-looking projects confidently. The content is created by The Woodsmith Review Team. Woodsmith’s editorial staff is not involved. Woodsmith is reader-supported: When you buy through links on our site, we may earn an affiliate commission.