Give a Gift FREE Book
URL:
https://www.woodsmith.com/article/sawhorse-flip-stop/
Share Page:

Sawhorse Flip Stop

By: Bryan Nelson
No shop is complete without at least one pair of sawhorses. Take a look at how adding a few pieces of wood can make them even more versatile.

One of the cardinal rules of using a circular saw is to make sure your board is secure before making a cut. But to be honest, I don’t always follow that rule. So instead of concentrating on the cut, I end up trying to keep the board from sliding across the sawhorse. To solve this problem, I installed two flip stops on each of my sawhorses. The stops hold a board in place without having to fiddle with clamps. W224 007a01 Each flip stop consists of two wood blocks. The flip stop itself can be pivoted up when you want to use it (intro photo). A cleat mounted underneath holds the flip stop in the upright position. Before attaching the two blocks, it’s a good idea to bevel the end of the flip stop. This makes for a handy finger recess. W224 007f03 There are a couple of things to keep in mind when locating the flip stop. First, when it’s in the down position, it must be below the top of the sawhorse (photo above). This way, it won’t be in the way when you’re not using it. Also, check to make sure it will pivot without binding against the cleat. W224 007f02 W224 007a01 d01

Published: Aug. 25, 2016
Share Page:
Topics: None

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

SHN_5FreePlans_300x250

WSM Sidebar Ad_PlywoodProjectsSIB

Related Articles