URL:
https://www.woodsmith.com/article/using-angle-blocks/
Share Page:

Table Saw Angle Setup Blocks for Accurate Cuts

By: Vince Ancona
Set precise table saw blade and miter gauge angles with simple plywood setup blocks for faster, more accurate, and repeatable cuts.

How to Set Accurate Table Saw Angles with Setup Blocks

Getting an accurate angle on your table saw blade or miter gauge is essential for tight-fitting joints and precise woodworking projects. But relying on the angle scale built into your table saw isn't always the most accurate approach.

A bevel gauge offers more precision, but it's easy to accidentally bump the gauge and change its setting. These simple shop-made plywood angle blocks provide a faster, more reliable way to set common angles.

Make Simple Plywood Angle Setup Blocks

The idea is straightforward. Cut a series of blocks from 1/2"-thick plywood, each with an accurately established angle. Label the blocks to match the angle settings on your table saw so they're easy to identify.

The 1/2" plywood is thick enough to provide a stable reference surface while fitting between the saw blade's teeth. This allows the block to register against the blade plate rather than the carbide teeth for a more accurate setup.

Make blocks for the angles you use most often, and keep them handy near your table saw.

Set Your Table Saw Blade or Miter Gauge

To set the blade angle, unplug the saw and place the appropriate setup block against the blade plate, avoiding the teeth. Adjust the blade tilt until it matches the block, then lock the adjustment.

The same blocks also work for setting your miter gauge. Simply use the appropriate angle block as a reference to position the gauge for an accurate angled crosscut.

Unlike an adjustable bevel gauge, these fixed-angle blocks can't accidentally lose their settings. Once you've made them accurately, you have a dependable reference you can use again and again.

It's a quick, inexpensive shop tip that makes setting up angled cuts easier and more consistent.


More Table Saw Tips & Techniques

shop-made push block

The table saw is at the center of most woodworking shops, and for good reason. From accurate crosscuts and joinery to ripping lumber and cutting sheet goods, it's one of the most versatile tools you own. Explore more Woodsmith table saw tips, techniques, and shop-tested solutions to get better results from every cut.

READ MORE → Explore More Table Saw Tips & Techniques

Published: April 12, 2012
Share Page:
Topics: quick shop tips, table saw

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Topics

  • quick shop tips
  • table saw

Related Articles