How do you know when it's finally time to throw away those scraps you've been saving for years?
In Episode 292 of the ShopNotes Podcast, Phil Huber and John Doyle catch up on what's happening in their workshops. Phil shares the challenges of building a new furniture project for Woodsmith Magazine, from frame-and-panel construction and joinery decisions to fixing mistakes before they become bigger problems.
The conversation also turns to shop organization, cleaning out lumber racks, and deciding which offcuts are actually worth keeping. Plus, John and Phil take you behind the scenes of how reader-submitted woodworking tips become the clever jigs, fixtures, and shop solutions featured in Woodsmith.
Along the way, there's plenty of discussion about shop footwear, unfinished projects, and the little things woodworkers learn through experience.
In This Episode:
Building a furniture project for Woodsmith Magazine Frame-and-panel construction, loose tenons, and woodworking mistakes How project designers and builders approach woodworking plans differently Organizing lumber racks and deciding which wood scraps to keep Cleaning and decluttering your woodworking shop How reader-submitted woodworking tips are developed and tested Shop shoes, old projects, and listener comments
Transcript
Phil Huber (00:04.772) Hey everybody, it's the ShopNotes Podcast, episode 292. We got fresh coffee, cold weather, and hot takes all coming up in this episode. I'm Phil along with John today. We've sent Logan off on assignment, and he'll join us next week with an update. first things first, though, we want to put in a little message from our sponsor.
All right, we'll check in first up with comments from last episode where we
Always appreciate hearing from folk. Rick Delmer says, Logan's dinner invite, BYOP, bring your own plates, which if you didn't listen to last week's episode, I'm not gonna rehash that because the dreams have finally stopped. he says, I've put my bicycle helmet in the dishwasher, works great. His favorite Christmas gift was an acoustic guitar he built for his son. And for shop clothing is his apron.
So that's really no other like special shop gear as we were talking about last time. driftless joinery. Eric says my shop is about a hundred yards from the house, and I only wore crocs for years. I slipped and fell enough times on the wet grass or on the concrete as I walked into the smooth shop floor that I retired them. Now he's got Danner slip on boots, the Chelsea, every day for the last three years.
Pretty soon it'll be cold enough that we'll always have a ratty hoodie on in the shop that I can't wear anywhere else. That's true. There's definitely a hierarchy of clothing, at least for dads, in that you get as soon as you get a new pair of running shoes or trainers or whatever you want to call them, your previous set immediately turn into the mowing shoes.
John Doyle (03:46.019) Yep. Yeah, for me it's the I have the black ASICs gel cumulus that's just like every six months to a year. It's get the get the latest version and they go from my church shoe to my shop shoe to my mowing shoe and then to the garbage. But same shoe, same shoe. If it works, just roll with it.
Phil Huber (04:14.22) It's funny because I was raised among a family of thrifty German farmers who, you know, we always tried to push the limits on how far you could take stuff. And I walk my dog twice a day. We usually do about four to five miles a day between the morning and evening walk. And my wife's kind of gotten me in the habit of
getting new shoes every six months, like you said. And earlier this summer
Now it was like late spring. I was due for another pair and she asked, like, hey, do you need new shoes? It's kind of about that time. And I'm like, No, I think these are actually feeling okay yet. And the tread wasn't super worn down. So I thought I could go a little bit farther with them. And like a month later, I kinda I developed a case of plantar fasciitis and then switched shoes. And I'm only now here in November.
getting to the point where it doesn't hurt sometimes on my heel when I'm walking. So apparently I've crossed that stage of life where you kind of gotta be like on top of it.
John Doyle (05:30.262) huh.
John Doyle (05:35.513) thing I wonder is for my girls at home the big thing is like water bottles and they go through like different fads of like I don't know like the Stanley was popular than Awala and it's like just different vessels for drinking water and it's like you gotta get a whole new thing every couple of years and it's like for men is it like the fad of the slip on shoe where
Like we went from Crocs to Hey Dudes to Sketcher. Like it's whatever the latest the trend is. Like you just kinda grow out of it and you gotta try something totally different. I don't know.
Phil Huber (06:08.836) All right.
Phil Huber (06:16.484) Yeah, maybe. I I mean, since Logan's not here, we can sort of pick on him a little bit in the fact that he did go from Crocs to hey dudes to kind of some s slip on boot thing now. So So is he the trendsetter or merely a sheep? I guess is the is the question. All right.
Bonyboard Woodshop says before John said that there was a gift that still wasn't done, I was thinking doesn't John have a project that's moved houses and has sat for years? And the answer is yes. Maybe a perfect shopsmith project.
John Doyle (06:53.9) That is that gift. That's I was just thinking about that the other day. It's like, is this where Shopsmith comes together with finishing a project? Who knows?
Phil Huber (07:06.594) I guess the question that I have is like that project that still needs to be assembled, are we even it just needs glued together, right? Like there's no
John Doyle (07:16.63) Yeah, there's the case parts are all there and need to be assembled. There's parts for styles and rares for the doors. So once it would be together then you just have to make the doors and fit those, glass doors. I think it's a pretty basic top. I can't remember if the top's there or not.
And then the base of it just needs to be assembled too. But it's one of those things is like I have no real need or purpose for it right now, but it was like it would be just for the accomplishment of saying I got it done. And it's and it's out the door. I don't know if I would just build it and then send it off to wherever, but it's there, it's there.
Phil Huber (07:52.676) All right.
Phil Huber (07:59.439) There you go. Yeah. Okay. All right. Well, chime in if you want to see John finish this off. Maybe we can do a couple of videos on it on how to pick back up from a project when you don't remember when you actually even started it. And then being able to wrap it all up. he goes on for Logan, my dad has always thrown his hats in the washer in one of those cages, and his has a curved bill, but it's from the nineties.
So
John Doyle (08:31.212) Nineteen nineties.
Phil Huber (08:32.332) Yeah, the late nineteen hundreds.
John Doyle (08:35.574) Mm-hmm.
Phil Huber (08:37.636) almost perfection. Interesting show today. Shop wood f footwear is currently an old pair of slippers. Okay.
Which kind of implies that you either live in a pretty mild climate or your shop is pretty well conditioned for space. 'Cause there are definitely times of year where slippers would not fly in my shop.
can't stand flat bills on baseball caps either. Crazy to hear about the Crocs change of heart. I was almost convinced to buy my first pair. I think it's safe to say that John and I were our gasteds are still flabbered by the fact that Logan switched from Crocs.
John Doyle (09:27.694) There was big croc guy back 2005, 2006 when they were first a thing and then same thing, it just kind of it just passed. Like I had went through several pairs and then just someday woke up and moved on.
Phil Huber (09:43.79) Yeah. Okay.
My father in law was a huge Crocs fan. Like, I think he had
Probably close to two dozen pair of different styles, kinda depending on, you know, where he needed to be. But yeah.
John Doyle (10:07.854) Yeah, that's the first place that I kind of saw them was like in the people in the medical field using them, like nurses and people that, you know, they needed a a shoe to slip on and could be c you know, washed easily and that's kinda where I picked it up. And after we had our first kit and saw some of the people in the hospital wear those. So, like, you what? I'm gonna I'm gonna give it a whirl. And I carried it for a couple of years, but
Phil Huber (10:36.932) Yep, there you go. Michael Thompson says, John, in my house, the bowl that we use for vomit is referred to as the toilet bowl.
Which I totally get, Michael Thompson, but you must not have kids who may or may not wake up in the middle of the night and have an immediate need to deposit, make a deposit.
John Doyle (11:05.292) Yep. Yeah, it's a big thing when you get your kids to the age where they can just make it to the bathroom to do that. So
Phil Huber (11:19.076) All right, then he says, Logan, I bend the bill and fold the hat over and shove the bill through the strap. Works perfectly.
Which I was trying to picture this. It's kinda like ball cap origami a little bit, just or one of those like TikTok or YouTube shorts where it's like, Did you know that you could take a Chinese takeout container and it folds flat into its own plate sort of thing? That that's kind of how I felt about that.
Phil Huber (11:58.467) Right. Yeah. shop footwear, a pair of old leather hiking boots from my son's Boy Scout years. Though they're getting to the replacement point, so I'm thinking about work boots. It's a habit from work.
Which is fine. I know sometimes people will set up their shop and their shop practices that are very different from what they would do in their day job. So that there's a very you know, like if you wear a certain type of clothing at work, then when you're doing stuff for fun, it's a totally different set of clothing, just to be have that mental break, maybe.
to embody that difference of of what's going on. But
John Doyle (12:48.45) Yeah, I like a hiking boot. That sounds good for a a sh shop shoe. Like like you, I have cold concrete floors. So it's like anything to separate your feet from that floor. 'Cause it just like standing on it, you don't notice it, but it just like slowly saps the heat into the ground and by the end of the day your legs are cold and sore and so
Phil Huber (13:13.282) Yeah. Yeah, definitely sore. It's funny how that can kind of build up on you. And I'll get it where then I'll go inside, sit in the recliner, and then, you know, twenty minutes later get up to make dinner or something like that. And you just your feet are just stiff and sore and
Making a bunch of old man noises as you move around then.
So always good to hear from our listeners and viewers. You can chime in as well. You can send an email to woodsmith at woodsmith.com. That's the email address. Or subscribe to the Shop Notes podcast on its YouTube channel and leave a question, comment, or smart remark there. always a good time. And we always have like a good, good stable of regular listeners tuning in, and we'd love to have you part of it.
So last week and a half, I've been working on my first project that I'm building for Woodsmith. I've been writing for the magazine for twenty-four years now. And I've built a bunch of tips in the past. My first
One of my first assignments when I started at Woodsmith and Shop Notes, Terry Strowman, the then editor, had me on tips as the new guy. And back then I was responsible for getting the tips in, writing the tips, building the props for photos and taking care of all that. And so I built my fair share of I think it was like seven or eight years, I think, that I did both magazines.
Phil Huber (15:07.566) Worth of tips.
Phil Huber (15:11.36) Anyway, so in terms of like a full on regular furniture project, I've been kind of deep in it the last week and a half. I think we talked about it last episode, a little bit of small chest slash bench that I've been working on. And it's been a lot of fun to try and figure it out, but also a little nerve wracking because I know that this is gonna get photographed and put in the magazine and
I'm trying to remember all of the details that I normally think to myself, but then forget to do until it's like much more inconvenient than if I would have done it two steps earlier.
Like all the panels on this project are solid wood that I resawed from the oak. And I'm trying to remember to pre-finish them before so that with expansion and contraction, you won't see any unfinished, like pale colored bands around the outside. it's frame and panel construction. And so I'm trying to remember to
Run a hand plane or a sanding block over the inside edges of all the styles and rails so that I don't leave the like ripple marks from the the planer on there. dry assembly to make sure everything fits before the glue goes on. All of that sort of thing. It's
Phil Huber (16:44.216) kind of crazy. And you can kind of chase yourself in circles thinking about like, did I get everything? Did I measure that right? Are you sure you measured that right?
John Doyle (16:56.6) Yeah, I'm the I'm the same way when it comes to building projects for the show or the magazine, where the farther I get into it and the more time and material I've invested, the slower and more deliberate I get. Because it's like if I screw it up now and have to start all the way back or go back and do something and I don't know how you're doing on materials that you we got from Logan, but it's like I've only got so much of this wood. So if I screw it up
gonna look weird if I have to go get different wood or that kind of thing. So it's yeah, it comes very methodical and thought out as you get towards the end. And then you get to the finish, I think you're going with a pretty simple finish, but it's like, okay, don't screw this up now when I get to the finish. So
Phil Huber (17:45.433) Right. And then trying to do like all my sanding before I get everything assembled and trying to take care of glue squeeze out right away. And yeah, I ran into that a couple of days ago. I was gluing up panels for the lid and thought that I was all ready to go. So I had my style and rail pieces for the lid, kind of rough clamped them in place so that I could measure for the panels.
And then as I was clamping it up, I'm like, this seems really big compared to what my panel blank is. Like I it must just be to scale, like cause the panel's over there and I'm working over here. And then I go and grab the panel blank and I'm like, I'm like five inches too narrow on my panel blank. And it's like, okay. And then I had left all of the
all of the innards from the planks that we had cut up the other day on a cart in the shop. And I went back and I found a piece that had decent enough grain and I could resaw a few pieces off of it and glued that onto the sides of the panel. And I think it's gonna look okay, but it was still, like you said, like there's only so much wood and
John Doyle (19:05.358) Yeah.
John Doyle (19:10.594) Touch and go there for a bit.
Phil Huber (19:12.13) Yeah. Yep.
So and then obviously there's gonna be some mistakes on there that I'm not gonna tell anybody about. And we'll just it's gonna be one of those things where I'm gonna know and it's probably just gonna be me that it irritates for the end of time.
John Doyle (19:23.182) Mm-hmm.
Phil Huber (19:36.271) But anyway, so that's been kind of a fun tag team effort because I saw this project, like I said, at a friend's cabin, got some measurements from it. John, you drew up all the plans for me. And then so we've been working on that back and forth on things and changes to it and talking through techniques and stuff. And it is kind of interesting to see how
When I look at a set of plans, I look at them with an eye to how I would normally make something. And I'm wondering like when you're drawing plans, do you think in terms of if I were building this, this is how I would do it? And then that's reflected in the drawings? Or can you be pretty agnostic on that?
John Doyle (20:25.426) I am very much like this is how I would do it or I can only design it in a way that I could accomplish it. And then sometimes I think, somebody else is building this. I can do whatever I want and let them figure it out. But not very nice, but and a lot of times I will go back to either projects I've done in the past or projects that have been in the magazine. It's like, we did this technique to get there.
I know that we've done it before. So I can draw it up in in that manner. And a lot of times I'll be like, hey, Mark, you know, this is how we did this previously. If you want to do it that way, or if you want to figure it out your own way, or or if they want to kind of use the art in the magazine as a as a template of like, okay, these are the steps, type of thing. So yes, very much I get stuck in my own.
like patterns. And and I was very much that way you know, twenty some years ago when I first started here. It was like I could only do it in the ways that I know. And then it really helped when I started working on the T V show and I had to build props.
For the projects that somebody else did and they've been in the magazine and it's it's stuff that I wouldn't do or wouldn't feel comfortable with, but you know, we gotta do it this way. So kinda got me out of those patterns that that I'm just familiar with and and and doing things different and kinda learning how other people did things. So that's I mean, kinda interesting and and it was good experience. So but
Phil Huber (21:54.039) Okay.
John Doyle (22:08.066) Yeah, a lot of times I'll fall back to what I'm comfortable with. So it's always it's always good to try the new things or when we've done like courses, like the finishing one we did recently, where it's like, there are different finishes that are easy than just spraying lacquer on anything. It's like, yeah, that's interesting. I could I've seen that done now. I could totally do that. And so it's it's a good experience to be around
Other woodworkers and
Phil Huber (22:48.994) Yeah, 'cause I've been
Frame and panel technique on here is kind of one that we've used, where it's just stub tenon and groove joinery is how you had drawn it up. And then I just rift on it for the technique that I usually use, where I just route grooves on everything with a slot cutter and then make little loose tenons that stand in the take the place of the stub tenons. So
It makes sense in my head, but it was just kind of fun to be able to take existing drawings and be like, I know what to do to make this work for how it happens in my own shop or my you know, the way that makes sense for me that I feel comfortable with doing. So anyway, that'll be in issue two hundred and eighty nine of Woodsmith coming out. probably about a month and a half or so. I'm thinking January ish.
Feels right.
Phil Huber (23:55.589) for when this one it's the issue that goes out the door just before the Christmas break here. So it'll be one of those things where it's like we wrap up this issue and then all of a sudden all the vacation notices come in on people leaving to get out.
John Doyle (24:11.308) Yeah, it seems like we're doing photography always right around Thanksgiving. So that's always a push to either get everything done before or right after Thanksgiving and then it's like goes out the door and then it's like okay, bye. It's like we're all we get all caught up or like a little bit ahead and then it's like, All right, time for holidays, we'll worry about the next thing and in January. And then we're scrambling again. So
Phil Huber (24:40.546) Yeah. So thankfully with Woodsmith, we don't have the same issue like Logan was talking about with popular woodworking, where he finishes an issue and then has both the Thanksgiving holiday and the Christmas New Year holiday that impact workflow for a single issue. We get to have it like two issues back to back where there's kind of that interruption where
You think to yourself, I mean, Thanksgiving is only just a couple of days, right? But you know, people wanna travel and as well they should and enjoy some time off and whatever. So
John Doyle (25:19.48) Yeah. Same with Christmas to New Year's. It's like, yeah, I can get a lot of stuff done during that week. There's nothing going on. And then pretty soon it's January second and it's like, I didn't do anything. I don't even remember what I did a week ago, so I gotta catch back up.
Phil Huber (25:30.915) Yeah.
Right. Yeah. Yep.
couple days ago I took the day off to spend some time in my workshop and have just a whole day of shop time, which I feel like with a high schooler and a student off at college, like should be easier to come by, but it feels like not. And I don't know exactly what the per what's what I'm doing wrong for that. But
so I got a couple of wrap-up projects taken care of and finished in my shop. And then as I was going along, kind of tidying up after that, I just got to the point where I needed to attend to my lumber rack.
'Cause I have that one wall in my shop. If you take a look at the YouTube videos on the shop tour, is materials storage plus some tools and accessories occupies one end wall of my shop. And in the midst of several projects, it's really easy for that to kind of get out of hand. And
Phil Huber (26:51.01) I was hoping that I would be able to avoid that with a whole day of shop time and then just be like just doing woodworking stuff. But apparently working on my shop cleaning up was like working on myself. I just needed to invest some me time a little bit and get rid of all the little pieces that had accumulated and turn that into firewood and but I feel a lot better about it now. It's
Maybe just needed a reset as we're transitioning to different seasons here because we've had a pretty mild fall until yesterday or today into tomorrow and into the weekend where it's gonna be a lot colder than what what it has been. So
John Doyle (27:41.913) Yeah, so when you're when you're going through your lumber rack and going through the little pieces like that, do you have a hard time letting go? Or are you thinking about like, maybe I should keep this and build something and you need somebody's help like there to like just throw it away, just throw it away. Or are you pretty good about if it's been there a while, okay, I'm not doing anything with this. There'll be other pieces that'll come along.
Phil Huber (28:08.258) Yeah, it's interesting. I think I've probably changed over time. Cause I think when I started, I held on to pieces a lot longer than I needed to because it felt like I don't know when I'm gonna get more material. And, you know, birth both in a sense of just like economic circumstances, you know, like being able to save scraps from around here was a way to contribute to my
Hobby at home. And then also just having young kids made it harder to be able to take time out to go to lumber yards and go to stores and buy material. So if you have it already, then you can just kind of whenever you can steal time to be in your shop, you can kind of get started on it. now it's been more of
Phil Huber (29:04.74) I got to the point where
It's easier for me to get rid of stuff because I know that even though this piece of wood has potential, like this would this could be a box part or whatever. And it's like, do I really want to make that box? Like is that the thing that's driving my interest in woodworking? Or am I just trying to make the most out of quote most out of this material?
So I think that still kind of catches me a little bit, but once I get started, you kind of pick up some inertia on being able to be like, well, I got rid of that. So it kind of like breaks the barrier. And then it's like all of these pieces just could go. Cause I had been holding on to smaller pieces because I thought, well, I could use it for carving practice or, you know, this would be a great
you know, small little thing that could be carved or added to another project and it's like, nope.
Phil Huber (30:14.232) I I was also thinking of that was a it's been a few years now where you had started that cleanup thing where it was like if you start on the first day of the month, you throw away or clean up one item and then every day going th forward you
Like add another. And I think you said by the time you got, you know, in the latter half of the month, even though those numbers started adding up, it actually kinda got a little easier, right?
John Doyle (30:45.058) Yeah, definitely like it it goes in waves for me too, where maybe like once a year, where I always have grand plans. I'm gonna keep this around, I'm gonna do this, I'm gonna finish this project, and then something'll set me off where a pile will topple over if I just get sick of tripping over the same things and it's just like, All right, everything goes. I'm just gonna, you know, clean house and do one of those months where it's like
you get the momentum and you start cleaning it all up and you get done and just like, you know what? I got a lot of space here. This is this is nice. And you kinda enjoy that for a while and then the cycle still starts all over again where you accumulate and kinda go through it. So definitely goes in waves.
Phil Huber (31:34.243) I've I was also thinking 'cause there was one point where I had taken most of the stuff off of my lumber rack and had it just kind of scattered around on the floor and workbench and in the garage. And I thought, is this really how I wanted to spend a shop day? Was you know, quote unquote blowing two or three hours basically doing cleanup?
And I powered through and by the time I got done with it it was I thought to myself, you know, actually it probably is a good way to do it because the type of cleaning that needed to happen, I just can't do in twenty minute little snippets of time. You know, you sorta need a dedicated large block of time to be able to get through something.
so that felt good.
Phil Huber (32:34.808) Yeah. And now I feel like my head is clear to get started on some some other projects. And yeah, I got the space for it.
I also kind of feel like we do the same thing around here when we finish with episodes or a season of the TV show where off behind the set we have our lumber rack. And as the season goes on, we're just kind of throwing off cuts and stuff back there. And you get done with it and you realize, why did we even keep this? Like there's just no point in holding on to and then it's weird to see that little bits of stuff that I have
I had a whole raft of basically like six by six inch pieces of quarter inch hardboard.
John Doyle (33:26.008) You never know.
Phil Huber (33:27.02) Right. Yeah. I mean it's probably one of those things where it's like it makes a great template maybe or runners or stop block I don't know what my what past Phil was thinking when he decided to keep it and
John Doyle (33:47.182) It's like can you edge glue quarter inch hardboard? I don't know. Maybe.
Phil Huber (33:50.052) I don't know.
Maybe we gotta see like Fest Tool can make like a little tiny like one eighth inch domino bit and then you can just like put little tiny loose tendons in there to hold them all together.
John Doyle (34:06.35) Well it'd be worth it. Get a fifteen hundred dollar tool to put six inch by six inch pieces of quarter inch hardboard together. Worth it. Right, right. Price of hardboard these days?
Phil Huber (34:08.599) Yeah.
Ha ha
Phil Huber (34:17.346) Yeah, yeah. Pays for itself, really, when you think about it.
Yeah. Yeah.
So anyway, I did that. also was kind of interested at one of the drawers in my storage section there has all templates that I've kept from different projects, past and present. And it's like, I didn't realize I still had that. So I was able to at one point I thought I would just keep all of those things as a record of projects that I've done. And it's now I wonder, you know, I just pretty sure I'm not going to repeat that one.
Which is fine. I can, you know, I still have photos of it or whatever. And bigger pieces of hardboard from templates I can, you know, turn into smaller pieces and that works out okay, which made it feel easier to get rid of the small pieces. Same thing with like Baltic birch plywood, like the price of Baltic birch and the quality of it. You're like, what is the minimum size on keepable Baltic birch?
John Doyle (35:25.912) A of times I'll use the small pieces for different like readers tips, props and stuff, but yeah. Sometimes it just gets too small and it's like, you know what, I wanna keep this but can't.
Phil Huber (35:41.828) Yeah. It's like I don't need a big box of pieces that could be like cleats or glue blocks or whatever.
So anyway, that's what I did. I felt good about it. I'm excited. I have a couple of chairs that I would like to make moving forward. So I kind of have some space for that now. And then got some cherry logs from one of my brothers that I could use sections of cherry logs that I want to make some shrink pots with and maybe some spoons and other green woodworking kind of things.
Phil Huber (36:23.118) So do you have any projects that you've been working on designing recently?
John Doyle (36:28.878) talked about last episode of doing some sort of storage project, but haven't done anything in the last week on that, so nothing new there. But you did mention coming up on the fo where we talked about the photography for this issue, so it's time to start doing reader steps. I'm still the new guy for in the design department, so I'm still doing reader steps twenty years later. So
But I've always enjoyed that. So great way to use up all the little bits of stuff we've saved. So kinda started on that and usually go through my desk drawers, see what pieces of hardware I've got in there and got going on and throw some stuff together. Yeah.
Phil Huber (37:18.648) I think what's interesting about being involved with readers' tips that I don't think many readers get is how much of a collaborative process it is. Because a lot of times we'll get there'll be waves where there's a lot of readers' tip submissions. And then there's going to be sections where it just feels like.
We don't hear anything and it's crickets. So then we have to kind of come up with something. And then that's where we'll pull in tips, you know, that we've been using in our own shops or see something that Mark has been doing in building a project or Dylan. but then also in either of those cases, like a reader will send in an idea, and then in us looking at it, there's usually
some other spark of creativity that goes on with it where it's like, well, what if we did this and then it's like reverse card and then you end up with a tip that's even better. And that's kind of cool to do.
John Doyle (38:31.96) Yeah. Because a lot of times people are sitting in stuff that's like, okay, this is what I did for this very specific project or task or whatever. It's like, okay, how can I make this more general that everybody can use? Or I found this very specific piece of hardware or tool and I turned it into this. And it's like, well, not everybody's gonna be able to find that. So how can I make it more accessible?
to everyone. So they kinda get, you know, tweaked a little bit. And a lot of times people are just a lot of their tips and little jigs that they do are just made out of scraps, which they should be. And then it's like, okay, how can we make this look nice with our boltic birch and hardboard and laminate b bits that we have and not just duct tape and bailing wire. So but yeah, there's a lot of tweaking and playing and prototyping and
Phil Huber (39:16.195) Right.
John Doyle (39:28.5) Yeah, like you said, that we'll we'll find stuff that we're doing around our shop that's like, you what, this would be something that'd be really good to share with the readers. They'd find it useful, but you know, where else do we put that other than the reader's tip section? There's not like a whole article there, there's not a whole project. It's like how to how do we get the word out? So we'll use stuff there when we're kind of slim pickings on stuff that's come in. So
Phil Huber (39:59.493) There you
All right, I think that wraps up another episode of the Shop Notes Podcast. If you have any questions, comments, or smart remarks, we'd love to hear from you. You can send that in an email, woodsmith at woodsmith.com. Or better yet, subscribe to the Shop Notes Podcast on its YouTube channel and then check out all the back catalog of episodes. We have coming up on, you know, a little shy of 300 episodes for you to pick up.
So if you're somebody like my dad who spends a lot of time on the road, you can tune in with us. Start with way back in issue in episode number one and follow along with all the things that are going on there. We've got a lot of stuff going, from building of Logan Shop to tools to projects, back issues of magazines, classes, and more.
All for you to go and then check out woodsmith.com for show notes pages where you can see a lot of the things that we've been talking about over the years on this. It's tough and a little bit shocking to think that we're coming up on our seventh anniversary of doing the shop notes podcast. So you can go way back and see us when we were our fresh-faced babies before this podcast aged us all.
So don't forget that part of what makes the Shop Notes Podcast possible are subscribers to Popular Woodworking and Woodsmith, as well as our members for Woodsmith Unlimited and Pop Wood Plus. Thank you to those. And if you haven't joined, please consider doing so. The Shop Notes Podcast is a production of active interest media. It's edited and mixed by Nate Gruca.
Whom we apologize to when we record these episodes way too late in the week, and he still manages to get them done in a amazing amount of time. Thank you, Nate. And John Doyle is our digital editor. We'll see you next week, everybody. Bye.




