URL:
https://www.woodsmith.com/article/shopnotes-podcast-291-i-mean-okay/
Share Page:

ShopNotes Podcast 291 — I Mean... Okay.

By: Phil Huber
Handmade Christmas Gifts, Shop Gear & Woodworking Updates.

What's the best Christmas gift you've ever made in your workshop? This week on the ShopNotes Podcast, Phil Huber, Logan Wittmer, and John Doyle share some of their favorite handmade woodworking gifts, from end-grain cutting boards and carved wooden spoons to full-size indoor playsets and bedroom treehouse lofts.

With the holidays approaching, the guys talk about the challenges of building gifts on a deadline, the satisfaction of seeing handmade projects still being used years later, and a few Christmas projects that might never get finished.

The conversation takes a few unexpected turns as well. Logan makes a shocking announcement about his shop footwear, the guys debate what belongs in the dishwasher, and everyone shares their thoughts on shop clothing, hats, and staying comfortable while woodworking.

Plus, there are plenty of updates from the Woodsmith and Popular Woodworking shops:

Phil's Latest Project: Turning rough-sawn white oak into a frame-and-panel blanket chest, including lumber selection, resawing, bookmatching, and the occasional stressful glue-up.

John's Next Design: Exploring ideas for a new small storage project for an entryway, desk, or laundry room.

Logan's Shop Updates: A completed table saw outfeed table with built-in storage, progress on a kitchen island, and upcoming furniture projects.

Along the way, the guys answer listener comments about tool collections, shop organization, and the best woodworking purchases.

Transcript

Phil Huber (01:27.152) Hi, I'm Phil. This is the ShopNotes Podcast, episode number two hundred and ninety-one, closing in on 300. And we're really not sure what to do with that kind of information. On this episode, we have John and Logan, as always, discussing the things that are going on behind the scenes, but maybe not all of them, at Woodsmith, Popular Woodworking, and the Woodsmith Shop TV show. Getting ready for season twenty-one.

On the TV show, even though maybe some of you haven't even seen season 20 yet. We're still kind of in the throes of that one getting launched, different parts of the country, depending on your public television station.

Here are comments from last week's episode. Rick Delmer says, Nice to hear John getting more than two cents in. Maybe too much Casey's coffee, John. We've had several of our woodworking club members who have realized that woodworking is no longer in their abilities and have donated their shop equipment to our club to sell to fund club activities. They state that they missed the activity, but glad they can do this donation while still alive.

versus having their loved ones have to deal with it so they can guide the sale and clean out since they are familiar with what they own. So a tool inventory has been a huge help. That was in response to a discussion that we had on last week's episode about Logan going through and updating his insurance as well as just kind of a discussion as to what happens

Logan (03:44.845) Mm-hmm.

Phil Huber (03:52.416) in a disaster or end of life transitions.

Phil Huber (04:02.13) Chris Smith writes, sorry a little late, but I just started listening to you guys recently, and my comment is about episode 284, which we don't remember, Chris. Specifically 3D printing storage. Okay, now I remember. I think if interested, one should look at the multi board system. It combines pegboards, sadistic boards, the slotted pegboards.

Logan (04:12.91) Phil Huber (04:29.916) The famous honeycomb wall, etc., all in one. I wish I could show you a picture of mine, just a small four foot by three size for all my 3D printing accessories, but it has been on my wall for over two years and has connectors for everything, including mounting connectors. All holes are threaded if needed as well. It really is the best all-around system I've found and strong. On my current wall, I have drills, pliers, measuring tools, etc. Thanks for the good info from a new

To woodworking, especially hand tools enthusiast. 35 years old from Canada. Now, if only someone told me the cost to entry would never be, would never be, would be never ending, my bad. When thrifting old tools. That is true. There's always one more old tool that you could get. And you think to yourself, I'll just sell the ones that I don't need or don't use anymore. And then

Your shop ends up looking like that cabinet that's right behind Logan right now.

Phil Huber (05:33.606) Your wood planes, all your wood planes.

John Doyle (05:34.169) Logan's catching strays.

Phil Huber (05:38.002) Ha ha ha

Logan (05:42.35) I don't know what you're talking about, Phil.

Phil Huber (05:44.026) Right. Right.

let's see

Phil Huber (05:54.331) It's really me, Dag Nabbit says, What project will you be building on the shopsmith loaner? I was at the show in Iowa and they made a cool table. That guy, Jim in the booth, did a great job. He did. They did a fantastic job on that table. I don't know that we've decided on a project that we're gonna do with the shopsmith. And it may be multiple projects. Like just different people will work on different parts of it and see what happens.

Logan (06:08.653) Mm-hmm.

John Doyle (06:24.569) Shout out suggestions.

Phil Huber (06:26.682) Right. Yeah. So table is one idea.

Phil Huber (06:35.246) Anybody can send those in, you can send those to our email address woodsmith at woodsmith dot com or leave it as a comment on the Shop Notes podcast YouTube channel.

Then a couple of them from almost perfection chiming in. He was wondering which way we would go with the tool you treated yourself with. Good answers. He was the one who started that last week's discussion about best thrifty tool purchase and best splurge tool, for lack of a better way to simplify that. Stretching the definition of tool, my answer would be the mini split. I finally put in pulled the trigger on.

Logan (07:13.72) Phil Huber (07:16.306) And his fast cap lefty righty tape measure is probably the most used cheap tool.

Logan (07:24.78) Mm-hmm. Mini split's a good one. Yeah. I wanna be out here near as much as I am without it.

Phil Huber (07:34.374) Have you started cranked up the wood burner today?

Logan (07:37.982) No, it's I don't know what's like I have w I might have said this last week. It's been up it's not been hot here in Iowa recently. Like it's been very nice. Like seventy, maybe, you know, mid sixties to seventy. Today's really windy though. I can hear it howlin'.

Phil Huber (07:48.432) No. Yeah.

Logan (07:59.523) For some reason I have all the mini splits shut off and it is getting so hot in the shop during the day. Like I will be working and I'm like, why am I drenched? And I look and it's like 77 degrees in here, which is not hot, but when you're working, that's plenty hot. And I went so far as to walk out to the other side of the shop to make sure the boiler wasn't turned on and heating my floor. Like I don't know if it is just the radiant heat from the sun heating up.

Phil Huber (08:14.32) No. Yeah.

Logan (08:28.152) building itself. I think that's probably what's happening. but man, it

Phil Huber (08:32.508) Which is weird 'cause you haven't really noticed that before in previous years, right?

Logan (08:36.59) No, but I also previous years you would usually leave the mini splits just on. Yeah. But no. It's been getting plenty warm in here without wood burner going. Although if the scrap bin gets filled up, I will turn it on in the, you know, early morning. I'll I'll clear the the scrap bin because you would think like I don't know what I have thirty gallon steel trash can, maybe a little bit bigger than that, maybe a forty gallon steel steel crash.

Phil Huber (08:43.446) Logan (09:06.542) Trash can that full of scraps from the shop. I will go through that in two hours. Like there's so much surface area and they're so small that they burn so fast. You know what I mean? Like it's not like throwing a log in there that takes a long time to get through it because there's not a lot of surface area.

Phil Huber (09:19.284) yeah, that's true.

John Doyle (09:28.579) you're just sitting there constantly feeding it.

Logan (09:31.276) Yeah. Yep. Yeah, like when I when I bring scrap home from the shop there, you know, we'll like two or three scrap bins fold about the same size, maybe a little bit bigger. Takes me a day. It takes me a day to go go through it all, you know. Which is nice just to get rid of it. But you know, if you're comparing time spent feeding the Soved BTUs out, it's pretty low.

Phil Huber (09:49.191) Yeah.

Logan (09:58.797) Much better to throw a giant oak log on there that takes, you know, two hours to burn versus a handful of oak scraps that are gone in thirty minutes, you know.

Phil Huber (10:09.906) I suppose that just shows how efficient the combustion of that little wood stove is.

Logan (10:15.458) Yeah. Yep. It's a pretty good one. Grand Teton from Tracker Supply.

Phil Huber (10:21.69) Okay.

John Doyle (10:24.077) Not a sponsor. Yet. Yet. Yet.

Logan (10:25.408) Not a sponsor, but it could be.

Phil Huber (10:25.66) Not a sponsor. Yeah. No eleven percent back.

Logan (10:28.93) Although I still no, no, I still though would love to find one of the morso Morse Morso stoves from Sweden. they're pretty they're pretty awesome. They're just expensive.

John Doyle (10:31.31) Yeah.

Phil Huber (10:36.593) Yes.

Phil Huber (10:42.694) Maybe we'll just have to put that on the tour for next year's Denmark Sweden tour is go there and then maybe you can get like factory seconds of those, like you can at Grands First Brussels. So I don't know, maybe. Almost Perfection has a follow-up question for us. not sure we'll tackle it today, but we'll see. favorite Christmas gift or gifts that you've made for someone?

Logan (10:46.926) Yeah. Yep.

Yeah, there you go. Yeah, yep.

Phil Huber (11:13.478) But we'll have to

See if we deal with that.

John Doyle (11:18.487) I've got some good ones.

Phil Huber (11:20.262) Yeah.

Phil Huber (11:23.664) All right. Bring it on. Let's do it.

John Doyle (11:27.533) Okay. see. I'm trying to think of what order that I built them in.

Christmas must have been when Millie was about one years old. So we'll say eleven years ago, twelve years ago. one of my kids wanted monkey bars and had just randomly asked for monkey bars for Christmas. And also in our basement, Millie, being one who's now thirteen, loved climbing on the coffee table that I'd shoved in the corner.

So I decided to turn one end of our basement into a play area with monkey bars and kind of like a mini fort castle slide situation. And this all like occurred from Thanksgiving to Christmas. So it was like several weekends to get this done of

Building it in the shop, going back and forth, measuring it to make sure it fit. And I think I don't remember how I got that in there without them seeing. Might have sent them with the grandparents for a night to to set it all in there and get it set up and just kept them out of the basement. But they were pretty excited about that. Millie not being able to talk wouldn't sleep Christmas Eve, so my wife and I were

John Doyle (13:05.011) up wrapping presents and just let her come down and play on it. Because it's not like she could like tell the other kids that it was there. It's like she was yeah, she's you know, still to this day hasn't told anybody. So we just let her play on it. It's like, well, whatever. We we got we got presents to wrap, so you're gonna do that. So we did that one and then it must have been a couple years later because we had Hazel by this time. So our two youngest kids were

Logan (13:10.519) Yeah.

Phil Huber (13:11.132) Yeah, she wasn't gonna rat anybody out.

John Doyle (13:34.105) three or four years old, decided same type of thing, like around Thanksgiving. It's like, I'm gonna build a treehouse loft for the girls' bedroom. And I'm gonna do this for Christmas. And same thing. Built it in the shop here. sent the kids with the grandparents the night before, brought it all in. I had done all these measurements, make sure it fit. I just assumed it was eight foot ceilings in there. And I when I got it in, was wrong.

seven foot seven foot ten inches. So it was like All right, taking it all back to the shop, gotta cut some stuff down and so

So two fun kid kid projects were my favorite Christmas projects that I built. So and then I have one Christmas project that never got finished from eighteen years ago. Still here. We've discussed it several times, but still here. Could be ready for this Christmas, Christmas. We don't know.

Phil Huber (14:30.022) Yeah. So st yeah. Any Christmas it could be available any Christmas. What was fun is watching those gifts get made here in the shop. And I say watching because it was more like the cobbler and the elves, because all of a sudden it would be like a big stack of plywood. And then you come back like a few days later or from a Friday to a Monday. And now it's

cut up and half assembled into something else and you just never know who was doing it or when or why or and like John said, he did do it in record time for as large as both of those projects were.

John Doyle (15:10.327) Yeah. Yeah. Usually it's a panic too because it's like Thanksgiving to Christmas, okay, four weeks and then you work backwards from that. It's like I'm gonna spray lacquer this and not fumigate the whole house with the lacquer smell. I've gotta be spraying the lacquer a week out from when I wanna deliver it. And so it's like working backwards of like meeting that the deadline of okay, I have to have this done by this point and get it finished and then it's gotta sit and then

I gotta figure out how to bring it into the house with all these pieces and get them to fit and so yeah. Fun stuff, but very stressful.

Phil Huber (15:45.372) Yeah. Mm-hmm.

Phil Huber (15:51.686) Logan, you got one?

Logan (15:56.155) not necessarily. I don't generally build Christmas gifts. I did really enjoy hindsight. Future Logan enjoyed the cutting board run I did that one year. Did like twenty five cutting boards, I think. All in grain, all two inches thick.

Phil Huber (16:15.961) yeah. Mm-hmm.

Logan (16:24.224) At the time, Present Logan was not happy with myself. but those those were good Christmas gifts and everybody uses them still. Like I still see everybody using So I would say those.

Yeah. Because most people don't go out and buy themselves a nice cutting board, so

Phil Huber (16:48.582) Right. Or a lot of times gifts like that end up either not getting used or

I don't know, shuffled off to somewhere else. So to have, you know, cutting boards that you see people using all the time.

Logan (17:00.718) Mm-hmm.

Phil Huber (17:07.632) I did a set of cutting boards for my in-laws one year. And

One of my sisters in law loved the cutting boards so much that she didn't wanna mess up. So to this day, they're just like display cutting boards in her China cabinet, which I'm not sure how I feel about. So yeah.

Logan (17:32.834) Yeah, I don't like that.

Phil Huber (17:40.617) for me

Phil Huber (17:45.043) I think it was had to have been right around the year that Logan was doing his run of end grain cutting boards. I decided that I was gonna carve spoons for both sides of my family, in-laws and my side of the family, and give all of the families a set of like four or five spoons. There was like a generic cooking spoon,

Let's see a serving

Like a s like a spatula kind of thing, a salad set, like a spoon and fork there. Then had I think a little coffee scoop spoon that I did. Altogether, I think it was like twenty-eight so spoons that I carved out of walnut.

And it was a learning experience in doing that. But it was also kind of interesting to try and figure out how to do things like that in a batch production style. Where, you know, instead of working on like one set at a time, it was like all the salad spoons and then all the salad forks, and then kind of working your way along through that. And kind of got into a rhythm, and you could realize if you were using all the same.

material like I was, like how deep of a cut you could take to be able to quickly remove a lot of waste without impeding what the final finish or final surface was going to be. So I'd have to say that was probably the most memorable one. I've I've built quite a few Christmas projects and it's kind it's still fun to go see different friends and family members projects and see them still in use around and

See how they're aging and whatever. So Yeah. Haven't really got a chance to work on mine this year too much, which is weird for me, 'cause normally six months too late, but just it's been a year. It has been a year. So

Logan (20:00.384) Which is like six months late.

Phil Huber (20:45.852) In addition to being in our kitchen, John is also, you can see over his shoulder, those of you watching on the the YouTubes there, we rescued a bunch of Acro Mills bins from some project prior to the garage sale, and they were covered in dust. And we decided to run them through the dishwasher, which turned out to be, frankly, a genius idea. And it got them clean as a whistle.

And ready to use. Yep. Pro tip. what you don't see directly behind John is the fact that I've started fermenting some peppers that I had growing in my garden. So I have poblanos and carrots in there, kind of like chilies in escabeche, and then also a variety of red chilies from my garden that I'm gonna be turning into kind of like a hot sauce.

John Doyle (21:16.791) Pro tip.

John Doyle (21:20.599) Yes.

Logan (21:45.538) Related note to both the Acro Mills bins going in the dishwasher and those peppers. I find the dishwasher is a great way to clean your toilet brush as well.

John Doyle (21:57.783) All right. I mean, OK.

Phil Huber (21:58.866) All right.

Logan (22:01.422) Ha.

John Doyle (22:05.003) So I'm not going to be eating at Logan's anytime soon.

you

Phil Huber (22:13.276) Which is funny because there was a the New York Times has a product review site called Wirecutter. And I get I get their newsletter, usually check on it for some stuff, it very well written kind of information. And they had one article where it was like eleven surprising things you can clean in the dishwasher. And there were some surprises in there. So no, they did not actually.

Logan (22:21.454) Great website, yeah.

Logan (22:39.182) Do they say hats?

Phil Huber (22:43.121) So

Logan (22:43.394) Cause I I I thought my mom was crazy. Love my mom to death. But sometimes do you guys like think back to your parents when you were younger and you're like, man, that stuff that they used to do, like I believed them because they were my parents, but now I realize how ***** crazy they were. So I thought I thought this other day. I wear yeah, I wear a hat every day for the most part, right? Like quite often I have a hat on.

Phil Huber (23:04.722) Beep.

Logan (23:12.078) And because of what I do in my day-to-day, my hats get nasty. Like they either get sweaty, they get sawdusty, they get grease on them. Like they just get nasty. And I have for the last couple of years just been throwing them in the wash machine with my clothes, right? And I was thinking about this, like because they and they wrinkle up really bad. So like if they're like a trucker style hat, they wrinkle on the front. but anyways.

I was like, yeah, there has to be a better way to clean this. I was like, you know, my mom used to throw these things in the dishwasher. Used to put my dad's hats in the dishwasher. And I'm like, I think she was just making stuff up. Like, I have never heard anybody doing that. So what I did two days ago was I ordered a hat basket. It's sitting in the shop here somewhere. it's just a it's like a little mesh basket that you put your hat in. It holds it flat so you can put it in the wash machine and it doesn't wrinkle and get all crunched up. But it says for the dishwasher as well.

Phil Huber (24:04.816) Okay.

Logan (24:09.006) And I was like, maybe mom wasn't crazy.

Phil Huber (24:12.882) All right. I can see that. I my mom for a while had the like plastic like hat frames where you put a baseball hat in it and then clipped it together. That that's what that is? Okay. It's a little bit of a clamshell. We're gonna find it right now, Logan says. He's gonna dig right in on it. So

Logan (24:26.828) That's what this is. Yeah, it's yeah, it's somewhere. I gotta find it.

John Doyle (24:33.047) That's right.

Logan (24:40.394) It is the E to E I I T O hat washer cage.

Phil Huber (24:40.422) There we go.

Phil Huber (24:48.987) Okay.

Logan (24:50.496) Look at that. Washing machine safe, dishwasher safe. So we'll see. Yep, we'll see if it keeps my heads clean.

John Doyle (24:55.799) Does that cage it with the bill flat or does it have the curve?

Phil Huber (24:55.94) Easy to store.

Logan (25:02.67) if it it goes full how do I say that? Bill Flat, John. Yeah. Not how I wear my hats. I you know, I had where was I? Was I Woodworking America? I don't think I wore a hat at Woodworking in America. No, it was one of our trade shows we were at. And I was going up to talk to one of our vendors, one of our you know, partners, advertisers, whatever.

And they hand me a hat, and the first thing I do is I grab it and I bend the bill. You know, like though the thing used to be you you'd wrap it around like a Mountain Dew can with rubber bands and whatever. and yeah, yeah. And whoever it was was like, I am so glad I just saw you do that. Like, I am so sick of flatbill hats everywhere.

Phil Huber (25:41.254) Right. If you wanted to go like extreme, yeah.

John Doyle (25:42.103) Sure.

Phil Huber (26:14.044) Okay.

John Doyle (26:14.359) Interesting. Yeah. Yeah, I was thinking about the toilet brush in the dishwasher, but it's like, if you think about it, yeah, yeah, I'm not going to do that. But I just, I just throw it away, I guess. At that point, I don't know. But if you go to someone's house and you have a big bowl of popcorn, if you think about it, that's probably also the same bowl that the kids get sick in. everybody's house, everybody's house, your own house. You do it at your own house.

Logan (26:18.734) Yeah, and you will now from now on. Yeah.

Phil Huber (26:25.52) Ha ha ha.

Logan (26:29.146) Ha

Logan (26:37.23) It's the puke bowl, for sure. Yep.

John Doyle (26:44.023) I mean, but just don't think about it.

Logan (26:46.2) Yeah. You know this one okay, so this doesn't actually pinch the hat. So you just put the hat on it. Yeah. No, you put the hat on it, then it goes in the laundry bag. But it's a hat shaped laundry bag. It's like a fedora laundry bag.

Phil Huber (26:47.238) Yeah. Right.

Phil Huber (26:52.248) yeah, 'cause the one we always had had like a clamshell on it. Yeah.

John Doyle (26:54.714) Logan (27:03.758) So there we go. This is if anybody's interested, $12.99 on Amazon. I cannot tell you if it works or not. Yeah. Look at that. All right.

John Doyle (27:10.933) Yeah. Call, call now, call now, call the number on the screen.

Phil Huber (27:21.042) All right, we've talked in the past about shop footwear and favorite shop footwear, whether you have something specifically to wear on your feet in your shop whenever you go out there, kind of like putting on your apron. but that brings up other questions now as to like when you're out in your shop, do you have a hat? Are you wearing, do you have a shop hat, other shop clothing that signifies that this is you time?

Logan (27:26.76) Mm-hmm.

Phil Huber (27:50.668) out in your workshop. Kinda like Mr. Rogers changing out to his zippy cardigans. Is it how do you signify that it's go time?

Logan (27:54.23) I'm Yeah.

Logan (28:05.262) I'm gonna admit something that I have not admitted.

Phil Huber (28:07.641) Okay.

John Doyle (28:10.071) You're in a safe space.

Logan (28:11.944) I have rec yeah, well, that's fine. That's fine. I have recanted my stance on Crocs.

Phil Huber (28:13.873) Except for Harold, he's gonna probably make a big deal about this.

Logan (28:23.054) I know. Yup. I'm no longer a croc person.

Phil Huber (28:23.663) Breaking news. This just in

Logan (28:31.168) And I cannot tell you why. I used to wear crocks in the shop all the time.

Phil Huber (28:35.353) Yeah, I know.

Logan (28:37.23) Not anymore.

Nope. And I think maybe the switch came when I finished this shop and I like started actually coming out here like every single day to work.

And maybe the change became more apparent to me this year because it has so we are currently four is a four inches away from a 12-month record in Iowa for per for precipitation. and it's been very soggy, so just walk into the shop, it's soggy. So I either have boots on or shoes. But I am now a work boots type guy. Yeah. I just I

Phil Huber (29:07.973) Yeah, for precipitation. Yeah.

Logan (29:25.354) My my oldest son loves wearing his Crocs, and whenever we're leaving the house, I don't know what it is that triggers me about him now. I'm like, do not put your Crocs on. Go get socks and put your tennis shoes on. I have no idea why. But no longer a Crocs person. I know it was a thing for a while, but nope. I know it was, and I don't know why. I do have shop slippers still.

Phil Huber (29:46.097) It was a big thing for a while.

And it's f Yeah. But it's still funny to me that you would go not just like, you know, I've just just don't wear recently, found, you know, it's been a wet year, all that kind of stuff. I but now you're like, no, I'm gonna pile up all the crocs and burn in the yard.

Logan (30:04.045) Nope.

Yeah, I don't even know where my camel cracks are. Like, couldn't tell ya. Although I do kind of feel

Phil Huber (30:13.861) I'm trying to decide if this is bigger news than the toilet brush in the dishwasher or

Logan (30:17.998) I have not checked the dish my shirt. I and I don't know if it's the advent of these slip-on work boots, which are now my absolute favorite. I told Elaine, my wife, this yesterday. we had a a work thing for her to go to, and I slipped my boots on, and I'm like, I just love these like slip on boots. Like I absolutely love them. Like

John Doyle (30:21.121) Wait, have you checked the dishwasher? Are the crocs in the dishwasher?

Phil Huber (30:23.067) Ha ha ha.

Logan (30:47.106) They're work boots, they're leather work boots. I I was out here welding this morning in them. like they're true leather work boots, but they slip on, which is great. They still have laces, but man, they're pretty awesome. So So for me, it is hat and boots. The rest of the clothing is completely variable. It's always there's always clothing, but no, not optional. I did I didn't say that for a reason.

John Doyle (31:11.895) optional.

Phil Huber (31:13.189) Ha ha.

Phil Huber (31:16.525) Let's be very clear about this.

Logan (31:17.146) yes. But nope, it is boots and a hat, generally.

Logan (31:26.562) I've even done some video with a hat on recently, which is weird.

Phil Huber (31:29.861) Right. Yeah. I think for me one thing that I've learned that works being out in the workshop is not is fleece. No matter the weather, because I've come in too many times where it's just been like shaving Velcro. And

Logan (31:40.32) Yes. one hundred percent agreed.

Logan (31:48.697) Yep. Or s or wool. Like I bought that nice wool sweater in Sweden. Cannot wear that in the shop. No. Like, nope. Absolutely not.

Phil Huber (31:56.539) yeah. Wow. Okay.

Logan (32:02.078) A, it was pretty expensive and I didn't want to fight it. But B, like, yeah, anything fleece, wool, I love, I'm a big fan of like Sherpa lined coats. Can't wear those because when I'm out, I'm like, I just I will just make sure I take it off if I'm running a chainsaw or sawmilling. Nope, I don't. I don't do that. So then I have like wood chips on the inside of my shirt.

Phil Huber (32:13.102) yeah, yeah.

Phil Huber (32:20.773) Yeah. You're like, No, I'm not gonna Yeah.

Phil Huber (32:32.485) I don't really have special shop clothes. 'Cause I'll be out there and

Whatever I'm currently wearing, whether it's like work clothes after mowing the yard or or whatever. So

Logan (32:43.232) Mm-hmm.

Phil Huber (32:49.155) I am excited for once it starts to get like cold cold to see how well my shop does with the insulation right from the start rather than like halfway through the the cold season. So that that'll be pretty pretty exciting for me.

Logan (32:57.944) Yeah.

Phil Huber (33:05.999) Maybe then I will find something that's just like this is my shop shop gear. Anyway, if you have any suggestions along those lines, would love to hear from you on that. So I'm still shook by just no mo crocs. Like that's it. I'm gonna need a minute.

Logan (33:11.692) Mm-hmm.

Logan (33:26.602) I'm yeah, I just I don't know why. And it was like it was yeah. But I see I wonder if that's like undiagnosed ADHD with me. Cause like I do the same thing with foods where it's like I will be all on the same food for months, every single day eating exactly the same thing, and then all of a sudden it's off and I don't touch it for years. Not that I don't like it, it's just

Phil Huber (33:53.489) Yeah.

Logan (33:54.679) Just had to run its course. For a while, it was Goldie's ice cream here in Prairie City. It's like a 10-minute, 15-minute drive from my house. Man, there was a there was a good two-month span last summer where I was going there every day. Goldie's ice cream every day. Yep. Haven't been there in six months now.

Phil Huber (34:02.072) sure. Yeah.

Phil Huber (34:10.732) geez. Okay.

John Doyle (34:19.575) I can do taco John's nachos Navidad for like three weeks in a row and then nothing for a whole year. then December rolls around again. Right back on it, right back in it.

Logan (34:25.42) Done. Yeah.

Phil Huber (34:26.745) Right.

Logan (34:30.766) You're back. It's back. Yep.

Phil Huber (34:39.119) Which makes me kind of wonder like when does Nacho's Navidad launch? Is it after Thanksgiving, really? Yeah. All right. Well, now I'm Jonesing for Nacho's Navidad. Dang it, John. Okay. All right.

John Doyle (34:42.391) I don't know. I would think so. I don't know.

John Doyle (34:48.235) Right. You gotta wait. You gotta wait.

Logan (34:50.058) Mm-hmm.

Phil Huber (34:56.121) All right, in light of shop updates that we usually get to at this point in the program, I'm working on building a project for an upcoming issue of Woodsmith. It's talked about it here in the past, based on a kind of a blanket chest slash bench of sorts that's at a friend of mine's cabin in Michigan's Upper Peninsula. The UP for people in the know. And I'm making one.

as a graduation gift for this year and decided to roll it into the ability to combine it with a project for the magazine. So last week John and I were at Logan's shop doing some filming for a special Kitchen Island project that Logan's working on and picked out some white oak boards, which I don't know if do you remember where that tree came from or was that just generic white oak that had to go?

Logan (35:54.553) Bobby Threefingers cut that tree. I don't remember I don't remember where it came from, but Bobby Threefingers and I did a we did a milling day at one of our tree guy one of our tree guys, Boyan, had a lot up in Bond Durant where he was like able to drop all of his tree waste at. And he would always have these big piles of logs.

Phil Huber (35:56.601) All right. There you go.

John Doyle (35:58.795) He's always got the good stuff.

Logan (36:23.21) And this was back when I had the Norwood, and we had a a day where Bobby brought his mill out. I brought my mill out, and we just stood there and it was Boyan and his crew and we were just milling logs. And I don't remember why that oak ended up at my place. in particular, but that one ended up in my place. That was one that Bobby had cut. yeah, it's just I mean, it's just a nice, just a nice white oak. Like

It had a it did have a weird it had a weird bark inclusion in it, like a seam.

which is a little odd. And if I remember right, those were really long boards and I ended up cutting them in half just to fit in the rack, 'cause I my my rafters are fourteen feet out there, and I know it was too tall to stand up under the rafters. So it was probably a fifteen or sixteen foot log and I just psh right in half. So

Phil Huber (37:18.833) Okay. Yeah. So we bought brought I don't know, it was like six planks back of that. And John helped me break it down because going from the white pine that I have been using on my desk project and then going to white oak is a difference not only in the grain pattern, but there is a pretty large weight difference in moving these pieces around. So

Logan (37:26.689) Uh-huh.

Logan (37:43.096) Yeah.

Phil Huber (37:47.229) Cause they were actually they were a shade over two and a quarter inches thick. Which it was a struggle to like initially cross cut 'Cause I the one Right, yeah. I had a

Logan (38:01.388) We need a sharp chainsaw, that's what we need.

Phil Huber (38:07.002) I had I thought I could do it with a jigsaw, but the jigsaw that we had didn't have enough throw and we didn't have blades long enough. Then I found a circular saw. And honestly, breaking down rough sawn planks with a circular saw always activates the clench function pretty highly because I'm just worried about

unequal pressure and then having like the blade bind. So

It was basically like a really deep scoring cut and then you just snap it like drywall. so I got that. And it's actually I find working with roughs on lumber to be a lot of fun that way. In that you kinda

Logan (38:49.057) I love it. I love it. Yeah.

Phil Huber (38:57.86) It's this mixed bag of looking for the best material for a given part of your project and then also getting down to the point where it's like, this is what I have to work with. How do I make the best of it?

Phil Huber (39:14.74) because I found a lot of straight green stuff for styles and rails. It's a frame and panel construction, both in the case and in the top of the of the chest. And then I John and I had initially talked about doing plywood for the panels. And right. And then as we were going along, I'm like, there's just enough stuff in here to make panels if I kind of resaw and bookmatch pieces.

Which is what I did. And where the bark inclusion was, kind of like on either side of that, was real feathery grain, almost like a like crotch or flame pattern in there.

Logan (39:55.073) It was yeah, it was almost like a crotch had grown big enough that it engulfed a a section of bark. Like that's kind of what it seemed like. It was like a seam in a in the tree where the bark was absorbed back in the cambian layer.

Phil Huber (40:08.112) Yeah. So that was really cool to be able to come up with enough material to make those panels from that. And it was just a lot of fun to be able to like I said, you're just looking at the board trying to figure out, you know, where are you do you want to make the initial cross cuts? How are you gonna break it down? And as a bandsaw aficionado, that is like you know, eighty percent is bandsaw work on that. Just trying to find your pieces and cut out and

Logan (40:34.638) Mm-hmm.

Well, and it's it's funny because I always feel like I don't feel bad because I I don't charge people enough enough for lumber when they come out here. but yeah, it is what it is. But I always feel bad where I'm like, you know, like these are pretty these are pretty rough. Like they've been air drying out in the out in the yard for a year, so they're gray, you know, they're they're dusty, they got squashed stink bugs on and stuff. it's definitely not like a

surfaced material that you go to the store and get. And it's not even it's not even roughs on that you get at a lumber dealer because those lumber dealers are getting their material from mills that saw the lumber and then that lumber gets stacked and immediately goes into a kiln. So it doesn't have a chance to gray or to weather at all because it's going they're I mean they're on throw put mode. They're not

John Doyle (41:08.481) Thank

Logan (41:34.163) They're not sawing and letting it sit. They're sawing, putting it right in the kiln. and they are running a gentle kiln cycle to get it to where they can crank it up. so it doesn't ever have that chance. So, like somebody going to a small lumber dealer or a small sawmill versus going to a rough sawn, like they look different. They're still both rough sawn. They're still kind of the same stock. You're just can kind of see a little bit more on this one than you can on this one. But I still like I love it. Like,

You grab that board, you're like, This is junky looking and then you cut into it and it's like, okay. Yeah, I'm down.

Phil Huber (42:07.888) Yeah. Yeah.

John Doyle (42:09.047) There's real wood on the inside.

Logan (42:11.072) Yeah.

Yeah.

Phil Huber (42:14.374) Yeah, 'cause I had like I said, John was helping me with breaking it down. So I was kinda doing the initial cross cuts and then kind of straight line, ripping it roughly at the band saw just by penciling in a line, and then John would clean up a face and an edge for me so that I could do other ripping or resawing on the parts. And it was really cool. Like we both was like, I this piece just didn't look like anything and then

You know, two passes across the joiner and it's like, whoa, all right, we got something there.

Logan (42:46.764) Yep. Yep. Well, an oak has a tendency to surface check really bad, even if it doesn't like it will surface check in the sun. Like, which is drives me absolutely nuts, because you'll have this beautiful sawn oak like quarter sawn. I've stacked it, stickered it in the shade, and then it gets two days of sun and all the surfaces are checked. And they're not deep, but they can get deep if it

Phil Huber (42:54.183) Yeah.

Logan (43:16.512) sits long enough. so like sometimes it's like, okay, is that gonna plane out or is it not gonna plane out? Is that two and a quarter inch stock gonna give me three quarter, two, three quarters, or is it gonna give me one inch clean, you know?

Phil Huber (43:31.923) Right. Yeah. So anyway, I was working on that, got parts processed for the case construction, front, back, and sides, and got those glued up just before we started recording on the podcast. And it's amazing how you know I've glued up hundreds of projects as a woodworker that sometimes you can still get about eight minutes into a gloop and just be like, crap.

And you gotta like scramble. Parts are fitting in a different way than they were when you dry fit them earlier and

And what seemed like a really nice, snug fit for your joinery and panels into grooves now feels like you need like a sledgehammer and wedges to be able to get things together. So that was

Logan (44:24.694) Mm-hmm.

Phil Huber (44:26.501) Always an adventure.

Logan (44:27.916) Yeah. I did that with this Alfie table, which is done finally. did it with the door this weekend. I was finishing up the the last couple photos I needed. I was doing it, you know, s Saturday or Sunday. And I'm like, all right, ready like test fit the panel, fit great, spread glute, and I could not get the last rail to go on. Like it was like and I could tell it was the panel holding an apartment.

Son of like so I'm tearing it apart, glue all over everything, trying to take a take a shoulder plane and get the tongue on this panel a little thinner so it just slides in. I'm like chamfering edges, like just need to start. Once it starts, clamps will squeeze it together. Like freaking a

Phil Huber (45:17.842) So anyway, I'm excited to see how it looks. And I actually followed my own advice this time and pre finished the panels before gluing it up using Old Master's tongue oil varnish. And I feel like that's a great product for white oak. Draws out enough color in it without making it yellow.

Logan (45:32.428) Mm-hmm.

Phil Huber (45:39.206) Yeah. Dries pretty quick. I like it.

Logan (45:41.804) Yep. Yep.

Phil Huber (45:43.996) So John, what you got?

John Doyle (45:46.838) Besides assisting you with that project, I've kind of started looking into the next issue, is kind of vague storage project for entryway or desk or laundry room. yes, smaller than a bread box. No. So a storage project, but

Logan (46:04.974) Something that goes inside the house.

Logan (46:13.238) Mm.

John Doyle (46:17.748) None of the projects we do are in a vacuum. So it's always compared to, well, what did we do last issue? What are we doing this issue that's like so different? Cause I think we're also like we've done, seems like we've done a lot of benches lately. I don't know. So it can't be really a storage bench. So I don't know if it'll be a wall storage or, or what. So we'll kind of see how this evolves in the next week or two of design, but.

That's my next assignment, I guess, from the design aspect.

John Doyle (46:56.032) So really giving you guys nothing there. Stay tuned. You know what? I'm just trying to ease into the new year here. So don't hassle me.

Phil Huber (47:10.396) Yep. Okay.

It's gotta feel good, Logan, having the outfeed table done. And being out there for filming was amazing to see because of how much.

Logan (47:17.154) Yeah.

John Doyle (47:21.299) Thank

Phil Huber (47:24.602) It's definitely a bulkier project than what you had in there before, but it still just seems to like fit and it's the right scale.

Logan (47:29.677) Yeah.

Logan (47:33.251) Yep, there it is. If anybody's watching, there's crap all over it and dust all over. But like, yeah, it's so it's just a I mean, it's a forty let's call it forty eight by forty-eight top on it. It's slightly smaller than that, but more or less a forty-eight by forty eight. it's long enough that I can rip an eight foot board, get it clear of the blade, and it does not tip off. which was my my idea when I was designing it.

Phil Huber (47:57.969) okay.

Logan (48:04.362) And with it being 48 by 48, it fits in it fits enough that there's plenty of surface for plywood sheets to slide across it. But I can still squeeze my big butt between that and the wall. So like accessing like my clamps that are stored over there or my table saw storage cabinet that's over there. I have a couple of like tapering jigs and corner jigs stuff that are stored on that wall.

There's plenty of room. it's it honestly what's really nice is the the Craig table I had there was it was like a it was like a four by seven foot. but it just had a shelf underneath it and it was just a catch all. It was one of those like don't have room for it, get it off the floor, throw it on the shelf. So like there was, you know, boxes of tape and finish and solvents and filler and epoxy and like just everything. There I found two corded I didn't know I had two corded drills. I had two corded drills on that cat on that.

Shelf, right? So just having like three storage drawers, where like top drawer now has all my finishing supplies. So like acid brushes, chip brushes, stir sticks, containers, paint brushes, like everything like that is stored in the top drawer. Second drawer is now my fasteners, so like brad nails, pin nails, staples, all that stuff. my screws that I use mostly in the shop are in there.

Phil Huber (49:04.005) Okay.

Logan (49:32.663) in the third drawer, I have not decided what I'm gonna store in there, but just like having that dedicated storage is super nice and helps alleviate some of that clutter that I could see. And then on the the far side, I have that door I was talking about earlier. My initial plan was to put two large pullouts in there. So it's a 35 inch deep, it's a foot wide by 35 inches deep. So it's really long and deep.

But it's not real wide. So I'm like, okay, we'll just make two storage pullouts. I had 30, I mean it must be 32-inch full extension drawer slides. we'll do two pullouts in there. and that's where I'm gonna store my epoxy. You know, like I I keep a couple of gallons of West system in, you know, in the shop. I have I've never actually used it, but I have some total boat and ecopoxy that I got from somebody whose husband had passed away or whatever.

but what I discovered is as soon as I put the first pullout in and measured, I can't fit a second pullout in there with the pumps for the epoxy. So so currently I'm just I'm saying, you know what, there's a little bit of dead space in the top of it. It's fine. you know, rather than make a two inch tray, like yeah, not worth it. but it does. It it feels really nice to have that done. the only thing I have left to do with it is to route in

Phil Huber (50:39.997) yeah.

Logan (50:58.808) miter slots. and that is 100% something I want to do because there's there's a few times where I went to use the specifically on the old outfeed table, I would go to use my miters gauge and I didn't have the I had the I had slots routed in it for my old shop, which it was in the different orientation. So like it, you know, it wasn't matching up.

Phil Huber (51:00.933) yeah.

Phil Huber (51:20.85) yeah.

Logan (51:25.806) so I need to get those done. But yeah, it's it feels really nice to have that done. so the the next thing in my shop is to either build all these doors and drawers for this kitchen island build, which I I do need to do. we did the video last week, like you mentioned, on showing how I build doors and drawers, and I'm super happy with how the doors I was I wasn't sure. I have these panels from Osborne that are these walnut timbre panels. I don't have any parts of it sitting next to me.

but my plan was to use those as the door panels, so a painted frame with these walnut door panels. And I had an idea of how they're gonna turn out. but when I when I popped the panel in, I was like, hey, these actually like these look pretty good. Like I'm pretty happy with this thing. So I do need to get those done. however, my next magazine issue is pretty quick. it's this is always a quick turnaround issue. knowing that we have

both Thanksgiving and Christmas in this issue cycle, for Popwood at least. So I kinda need to get another project shot and done for that. So I may hold off on the doors and drawers just for a little bit to to knock out a actual furniture project. so yeah, we'll see.

Phil Huber (52:50.354) All right, that wraps up another episode of the ShopNotes Podcast. It's a production of active interest media. Nate Gruca is the editor on it. John Doyle is the digital editor. If you have questions, comments, or smart remarks, you can send that to us at woodsmith at woodsmith.com or by subscribing to and commenting on the Shop Notes Podcast YouTube channel. We will see you next time, everybody. Bye.

Published: Nov. 19, 2026
Share Page:
Topics: workshop, workshop gear

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

Topics

  • workshop
  • workshop gear

Related Articles