What is a reciprocating saw? It is a power tool that is best for heavy-duty cutting jobs like remodeling, demolition, tree pruning, renovation, and much more. It is very similar in appearance to jigsaws as they work in the same manner! It is handheld equipment and there is a saw blade at the end. Please note that the blade in this saw is bigger than the blade you will see on a jigsaw. By pressing the trigger on the equipment, you can move the saw blade up and down for quickly cutting the materials. These are very powerful and cut tough materials like fiberglass, drywall, metals, ceramics, and much more. To buy the finest reciprocating saws in 2021, consider the following options:
This saw is available in a 14-inch compact design which will easily fit in between the studs for easy working. It comes with a keyless 4-position blade clamp that allows you to instantly change the blades with great ease. There is a brushless motor present inside this equipment. Moreover, it also provides 2.5 times more runtime.
Variable speed trigger that ranges from 0 to 2900 SPM
Only weighs 5lbs and has a 1-1/8inch stroke length
Bright LED light illuminates dark work areas
In some cases, the trigger lock might not work well
You can cut different materials with this 20V cordless reciprocating saw. It is equipped with a different speed trigger to provide a cutting power of up to 30,000 SPM. This device is very compact, lightweight, and safe as it has a built-in electrical brake. The initial battery voltage is 20 volts whereas the minimal voltage is 18 volts.
Easily change the blade without the need for any extra tools
Pivoting blade shoes improve stability and give you more control over
This equipment is developed for DIY lovers and gardeners. The motor present inside the device is powerful enough to reach a speed of 3000 strokes per minute to finish metal, hardwood, and ceramic sawing in a time frame of 30 to 60 minutes. Furthermore, due to its adjustable speed and replacement blades, it is ideal for different uses with great control.
Special lock-off button for better safety
The design makes quick blade change very easy
Rubber grip avoids device slipping from hand and makes one-hand operation very easy
This 20V cordless reciprocating saw provides your high-performance drivetrain. You will get a 1-inch stroke length and 0 to 3000 SPM for better cutting. It is lightweight with a mere weight of 4lb and it is compact enough to reach all the tight spaces. Moreover, the tool-free blade release allows you to change the blades without the need of any additional tools.
Has a variable speed trigger
Pivoting shoes will help in keeping constant contact with the material
Contoured over-molded handle to further improve the comfort
Not suitable for people who need more power for extreme cutting activities
You will get two functions with this one saw. You can turn the reciprocating saw into a jigsaw and back to reciprocating. The changing of the saw will be done with a push of a button and pivot of the head. The circular motion of the blade makes the cutting much better. When needed, you can easily change the blades without the need for any other tool. Moreover, it can easily cut different materials like copper, thin steel, PVC, pipe, fiberglass, and much more.
Dust blower will help you to keep your working space clean
Weighs less than 5lbs
Any standard or t-shank saw blades will perfectly work well in this tool
Battery timing is not very good
Best Reciprocating Saws Buying Guide
Reciprocating saws are very popular in performing different jobs like remodeling, plumbing, construction, and much more. It is ideal for rough cuts or tasks related to different materials which include cast iron, ceramic, plastic, and many more. You can easily use it in tight spaces and small corners without any worry! More importantly, these saws have a compact design and they are lightweight as well which ensures easy handling. Once you go out to buy one, you will see different models and designs. To pick the best one for your use, you have to be aware of some important features and your use. To know all, consider reading the following buyer’s guide:
What Are Different Types of Reciprocating Saws Available?
Mainly, there are two types which you need to know about:
This will perform best when you need to make powerful and fast cuts. You can use it for a longer time and this will effectively cut the materials. It is also very easy to handle as there is no weight of batteries. But remember that it might not be suitable for some jobs due to its limited movement. When buying, purchase a saw with a rubber cord instead of a plastic cord.
If you have to continuously change your position while working, then this is going to be the best option for you! No need to plug the device in any power outlet as it is operated with batteries. Always pick a lithium-ion battery to use for longer battery life. You can easily make the tough cuts at any place without the need for a power cord. However, the saw will lose power once the battery runs low.
What Types of Motors Are Available in Reciprocating Saws?
Without the presence of a motor, no saw is going to do the work. The motor is powered by a source. In the case of a corded saw, it gets power from a power outlet. However, in the case of cordless, the power arrives from the battery pack inside the device. Below are the two types of motors which you will see:
This type does not have carbon brushes instead there are small electronic circuit boards that are responsible for the delivery of energy. This is a powerful motor and will reduce unnecessary friction which ensures the constant flow of energy.
This is the standard and basic form of reciprocating saws. It has two main parts known as commutators and brushes. Similar to other tools, the carbon brushes will get damaged due to frequent usage.
What to Look For in a Reciprocating Saw?
When buying one for yourself, look out for the following features:
It is not the exact blade length but tells how far a blade will move for cutting in a back and forth position. Note that the longer stroke length will cut the material easily. Usually, it ranges from 0.75 inches to 1.25 inches. However, in some models, you can adjust the stroke length for better adaptability.
The number of strokes that a saw can make in a minute is called the speed. The high-speed saw will enable you to cut the material in a quick way. Note that a casual user doesn't need much speed for an occasional job but professional or regular users have to pick a high-seed saw for the usage.
Variable speed control
This feature is going to control the speed of your saw for improving consistency and precision. It will allow the user to adjust and select the speed level as per the material being cut.
Some other features which you should look at when buying the reciprocating saw are auto-stop, anti-vibration, carry case, tool-free blade change, orbital action, saw blades designs, blade clamp, and much more.
What Is The Price Tag of Reciprocating Saws?
To buy a reciprocating saw, you have to pay a price between $49 to $100. The price variation is due to the features you are going to get in your device like auto-stop, tool-free blade change, anti-vibration, and much more. To get better value for your money, you should consider buying a kit that includes a carry case, different blades, charger, and batteries.
Best Reciprocating Saw FAQs
Q: How strong of a saw should I buy?
A: A person will have to use different power levels which range from 5 to 15 amps. If you are professionals or have any heavy-duty work, you should consider buying a saw with the power of more than 10 amps to do your work.
Q: How does a reciprocating saw work?
A: The tool has a switch button. You have to press the safety lock button for releasing the saw before you turn it on. Press the on/off switch for keeping the tool in working mode. Once the work is done, turn it off by releasing the trigger.
Q: How to pick the best blade for work?
A: The selection of blades will be dependent on the material you want to cut. For instance, to cut wood, you will use a blade with 3-11 TPI. In the case of cutting denser metals, you will use blades with 12 to 18 TPI.