Woodsmith last issue Woodsmith current issue

Keep up to date with


Sign Up for Our FREE Newsletter

Give a Gift FREE Issue
URL:
https://www.woodsmith.com/article/shop-made-hold-down/
Share Page:

Make Your Own Drill Press Hold-Down Clamp!

By: John Doyle
This Clever Accessory Keeps a Workpiece in its Place.

You can find the step-by-step plans to build the Woodworking Drill Press Table seen in this video at WoodsmithPlans.com.

Commercial hold-downs are a great way to keep your work firmly in place. But you can make your own like this one quickly and easily.

To make this hold-down, you’ll want to use hardwood. Any type will do. What’s more important is that you’re careful to align the grain with the length of the clamp. This way, you don’t have to worry about the clamp cracking when you apply pressure with the knob.

To make the hold-down, transfer the pattern to the face of your blank. You can lay out the pattern using the grid marks.

It’s a good idea to drill the holes for the slot before shaping the hold-down. The slot provides clearance for a flange bolt. To make the slot, I drilled a pair of holes on the drill press and then cleaned up the edges of the slot with a chisel and small file.

All that’s left to do is cut out the hold-down on the band saw and sand it smooth.

Published: June, 14 2012
Topics: None
Share Page:

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

WSM Sidebar Ad_POD 200 Tips

WSM_zone58_PopWoodSubPromo_300x250

Newsletter Articles