
Drill Press Clamping Trick: Simple Magnetic Clamping Blocks
Clamping a fence or workpiece securely to a drill press table isn't always as easy as it should be. Many cast-iron drill press tables have reinforcing ribs, or webbing, underneath that can get in the way of a standard F-style bar clamp.
Rather than struggling to position the clamp around the webbing, you can make a few simple clamping blocks that provide a flat surface for the clamp jaw. Adding a rare-earth magnet makes these handy accessories even easier to use.
Make Simple Clamping Blocks for Your Drill Press
Start by cutting a few hardwood blocks to fit between the reinforcing ribs on the underside of your drill press table. The blocks should be thick enough to extend below the webbing, giving the clamp jaw a solid surface to press against.
Since the spacing and depth of the webbing can vary, it's helpful to make several blocks in different sizes.
Add a Magnet for Hands-Free Positioning
One of the frustrations of using a loose spacer block is trying to hold it in position while tightening the clamp.
A small rare-earth magnet solves that problem.
Drill a shallow recess in one end of each block and install a magnet. The magnet temporarily holds the block against the underside of the cast-iron drill press table, leaving both hands free to position and tighten the clamp.

Clamp Fences and Workpieces More Easily
To use the blocks, simply position the magnetic end against the underside of the drill press table where you need to place a clamp.
The block extends past the reinforcing webbing, allowing the lower jaw of an F-style bar clamp to press against a flat surface.
With the block held in place by the magnet, position the upper clamp jaw against your fence or workpiece and tighten the clamp.
The magnet is only there to hold the block during setup. The clamp itself provides the holding pressure.
A Handy Drill Press Accessory
Keeping a few magnetic clamping blocks near your drill press makes it easy to handle different clamping setups without special hardware.
They're inexpensive, quick to make, and especially useful when securing auxiliary fences, drilling jigs, or workpieces to a cast-iron drill press table.
It's a simple shop-made solution that helps you get more versatility from the clamps you already own.
More Drill Press Tips & Techniques

Get more from one of the most versatile tools in your woodworking shop. From clever clamping solutions and shop-made jigs to adjustable fences, drilling techniques, and handy accessories, we've gathered some of our favorite drill press tips to make your work easier and more accurate. Discover practical ideas that help you improve precision, save time, and get better results from your drill press.
LEARN MORE → Explore More Drill Press Tips & Techniques




