Woodsmith last issue Woodsmith current issue

Keep up to date with


Sign Up for Our FREE Newsletter

Give a Gift FREE Issue
URL:
https://www.woodsmith.com/article/hassle-free-crosscut-sled-setup/
Share Page:

Hassle-Free Crosscut Sled Setup

By: Erich Lage
Setting up a crosscut sled can be a fussy affair at times. But these three steps make the whole process a lot smoother.

w230 008f01

With the sled assembled except for the fence. Attach a scrap of plywood to the base of the sled with double-sided tape.

w230 008f02

At the table saw, make a pass through the front bridge and the plywood scrap. Now, pry off one of the scrap pieces.

w230 008f03

Align a large square to the cut edge of the scrap. Then, position the fence against the square and tighten it to the base from underneath. To finish, pry the scrap alignment block from the base.

When making my crosscut sled, I was having problems squaring the sled fence to the blade of my table saw. Things kept shifting slightly when trying use my square to align the fence to the kerf that I cut in the sled base. I found a simple solution for this. I attached a temporary plywood scrap to the sled with double-sided tape. Then I made the initial pass through the sled and scrap block. Doing this creates a solid reference point for a square to rest against. The steps shown in the three photos give the details on how I went about this. The bigger the scrap, the better, as it will provide you with more surface to set your square against. To simplify the process, I attached one end of the fence loosely to the base before aligning it to the square. Once I was happy with the fence position, I screwed everything in place.

Published: Sept., 9 2021
Topics: None
Share Page:

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

WSM eTips Landing Page Ad_Sub Promo

WSM_zone58_PopWoodSubPromo_300x250

Newsletter Articles