Give a Gift FREE Book
URL:
https://www.woodsmith.com/article/crosscutting-long-panels/
Share Page:

Crosscutting Long Panels

By: Erich Lage
Crosscutting long plywood panels can be a dicey affair. This simple trick let's you make these kinds of cuts accurately and safely.

W229 006f01 Plywood panels can be tricky to crosscut. Even when using a crosscut sled, it’s hard to keep enough pressure on the piece and make an accurate cut at the same time. The material wants to lift away from the blade. A nice solution only requires a couple of roller stands and a 2x4. The two stands along with the 2x4 are adjusted to the height of your sled. The weight of the panel clamped to the 2x4 allows the whole assembly to glide across the rollers smoothly.

Published: June 17, 2021
Share Page:
Topics: None

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

SHN_5FreePlans_300x250

WSM Sidebar Ad_PlywoodProjectsSIB

Newsletter Articles