Online Extras & Sources

Classic Oak Plant Stand

The plant stand is another simple hardware project. All you'll need are a few of the same steel table top fasteners mentioned above for the hall table.

TILE. You'll also need to purchase one or more ceramic tiles for the top of the stand. The tile I used was sold as 8" square although it actually measured about 713/16" square. The finished sizes of ceramic tile can vary quite a bit, so you probably want to have the tile purchased before you start to build. This way you can adjust the top to fit the tile. I found my tile at a home improvement store, but you could also try a flooring or ceramic tile store.

Get a FREE Preview Issue and FREE Book!