Give a Gift FREE Book
URL:
https://www.woodsmith.com/article/router-table-miter-spline-jig/
Share Page:

Router Table Miter Spline Jig

By: Erich Lage
Use this jig to add strength to mitered case joints.

Miter spline jig main drawing

This jig and your router table helps you cut stopped slots in the mitered corners of the nightstand or any case piece. It holds the workpieces steady and at the proper angle while making the slot.

Figure 1 shows how to position the jig on the router table. The jig is held in place with double-sided tape. Figure 2 shows the workpiece dropped in place. (Hold the point of the miter against the stop and lower it onto the bit.) Figure 3 shows how to mark the location of the bit edges on the stop.

Miter spline jig figure 1

Miter spline jig figure 2

Miter spline jig figure 3

Published: Sept. 2, 2022
Share Page:
Topics: None

Product Recommendations

Here are some supplies and tools we find essential in our everyday work around the shop. We may receive a commission from sales referred by our links; however, we have carefully selected these products for their usefulness and quality.

SHN_5FreePlans_300x250

WSM Sidebar Ad_PlywoodProjectsSIB

Related Articles