Updates & Revisions
Here you will find important updates and revisions to the articles and plans published in Woodsmith magazine.
- Page 51: Tips & Techniques Sources
- The item number for the Magnetic Holder from Travers Tools was printed slightly incorrectly; it should be 99-001-023 rather than 99-001-23.
- Shop Notebook
- Page 31: Figure 1
- The extension lines for the two dimensions that show the 3" width of the concave caul in Figure 1 should point to the bottom edge of the hardboard strip (waste side), not the top edge as shown.
- Stylish Dining Chairs
- Page 36: Figure 1, Detail 'a'
- The 1/4" dimension from the rip fence to the edge of the groove is inaccurate. The groove should be centered.
- Page 34: Back leg pattern & detail 'b'
- The length of the upper mortise in the back leg is incorrect. It should be 2 1/8", not 2 1/4".