Updates & Revisions

Here you will find important updates and revisions to the articles and plans published in Woodsmith magazine.

Woodsmith Issue 180 cover image

December 2008
Issue 180

Flat Screen Media Center
Page 37: Main illustration
The bead molding in the main drawing is shown as part EE, but it should be labeled as part T. The Materials, Supplies & Cutting diagram on page 33 and the drawing on page 36 correctly show the bead molding as T.
Page 33: Materials, Supplies & Cutting Diagram
Part F (Face Frame Ends) under the Side Base Cabinet should have a length of 31-1/4" not 31".
Page 34: Classic Cove Bit
Clarification: The classical cove bit has a 5/16" radius.
Page 33: Materials, Supplies & Cutting Diagram
Part FF (Side Veneers) should be 11" x 13-1/4". The drawing on page 40 is correct.
Page 33: Online Extra Cutting Diagram
The plywood thicknesses on the second page of the online cutting diagram were originally shown incorrectly. The full sheet plywood with pieces GG, FF, R, E, N and EE should be 1/4" thick. The half sheet with pieces P and BB should be 3/4". (The PDF has been replaced on woodsmith.com.)
Page 33: Materials, Supplies & Cutting Diagram
Part W (drawer fronts/backs) should be 10" long, not 10 1/2" as shown in the materials list. The art on page 37 shows the correction dimensions.
Hanging Wall Shelves
Page 51: Wall Shelves Sources
There is a typo; the word "includes" is misspelled
Page 19: Detail a Illustration
The depth of the cut should be 3/8", not 1/2" as printed.
Shop Notebook
Page 28: Figure 1
The centerpoint of the radius is listed at 2" but it should be 2 1/2" in order for the cutout to match what's shown on page 24 of the Snack Tray Cabinet project.
Tenons on the Router Table
Page 44: Online extra reference
The online extra bug in the margin should not be there. All the information is included in the article and there is no online extra.