Updates & Revisions

Here you will find important updates and revisions to the articles and plans published in Woodsmith magazine.

Woodsmith Issue 164 cover image

April 2006
Issue 164

Picture Frame
Page 18: Detail a
The measurement along the lower part of piece C is printed as 7/8" but it should be 15/16".
Page 19: Exploded view
Measurement of height of the right-most piece is printed as 13 but should be 8.
Page 18: Photo
(Clarification) The photo should really not include the frame piece shown at the top of the photo. There are only three different frame piece profiles. There are also three frame pieces for each door, but other than the width, the joinery is identical. So the margin photo should really show six pieces, but the three frame pieces for the door would be indistinguishable from the back frame pieces. Also, part D is not shown in the photo at all, but actually has joinery along each edge that matches the second piece from the bottom in the margin.
Picture Frame
Page 18: Detail a
The measurement along the lower part of piece C is printed as 7/8" but it should be 15/16".
Page 19: Exploded view
Measurement of height of the right-most piece is printed as 13 but should be 8.
Page 18: Photo
(Clarification) The photo should really not include the frame piece shown at the top of the photo. There are only three different frame piece profiles. There are also three frame pieces for each door, but other than the width, the joinery is identical. So the margin photo should really show six pieces, but the three frame pieces for the door would be indistinguishable from the back frame pieces. Also, part D is not shown in the photo at all, but actually has joinery along each edge that matches the second piece from the bottom in the margin.
Picture Frame
Page 18: Detail a
The measurement along the lower part of piece C is printed as 7/8" but it should be 15/16".
Page 19: Exploded view
Measurement of height of the right-most piece is printed as 13 but should be 8.
Page 18: Photo
(Clarification) The photo should really not include the frame piece shown at the top of the photo. There are only three different frame piece profiles. There are also three frame pieces for each door, but other than the width, the joinery is identical. So the margin photo should really show six pieces, but the three frame pieces for the door would be indistinguishable from the back frame pieces. Also, part D is not shown in the photo at all, but actually has joinery along each edge that matches the second piece from the bottom in the margin.