Updates & Revisions

Here you will find important updates and revisions to the articles and plans published in Woodsmith magazine.

Woodsmith Issue 146 cover image

April 2003
Issue 146

Beaded-Panel Storage Bench
Page 35: Sources
The router bit sourced from MLCS should be part number 6430, not the 6431 as originally printed. The 6430 bit is the proper 3/16"-radius bit used in the article on page 28 and in the technique article on page 26.
Cherry Console
Page 8: Detail drawing of end stiles on left edge of page
The measurement 3/8" appears but in all cases it should be 1/2".
Page 8: Figure 2
The measurement 3/8" appears but in all cases it should be 1/2".
Page 8: Figure 3
The measurement 3/8" appears but in all cases it should be 1/2".
Page 13: Figure 14
The measurement from the edge of the drawer for the ring knob is shown to be 7" on the drawer front. The correct measurement is 4".
Cherry Console
Page 8: Detail drawing of end stiles on left edge of page
The measurement 3/8" appears but in all cases it should be 1/2".
Page 8: Figure 2
The measurement 3/8" appears but in all cases it should be 1/2".
Page 8: Figure 3
The measurement 3/8" appears but in all cases it should be 1/2".
Page 13: Figure 14
The measurement from the edge of the drawer for the ring knob is shown to be 7" on the drawer front. The correct measurement is 4".
Cherry Console
Page 8: Detail drawing of end stiles on left edge of page
The measurement 3/8" appears but in all cases it should be 1/2".
Page 8: Figure 2
The measurement 3/8" appears but in all cases it should be 1/2".
Page 8: Figure 3
The measurement 3/8" appears but in all cases it should be 1/2".
Page 13: Figure 14
The measurement from the edge of the drawer for the ring knob is shown to be 7" on the drawer front. The correct measurement is 4".
Cherry Console
Page 8: Detail drawing of end stiles on left edge of page
The measurement 3/8" appears but in all cases it should be 1/2".
Page 8: Figure 2
The measurement 3/8" appears but in all cases it should be 1/2".
Page 8: Figure 3
The measurement 3/8" appears but in all cases it should be 1/2".
Page 13: Figure 14
The measurement from the edge of the drawer for the ring knob is shown to be 7" on the drawer front. The correct measurement is 4".