Updates & Revisions
Here you will find important updates and revisions to the articles and plans published in Woodsmith magazine.
August 2001
Issue 136
- Folding Bench
- Page 30: Long leg pattern illustration
- Degree indication on left edge of drawing should be 28.5 degrees, not 20 degrees as printed.
- Tile-Top Table
- Page 22: Materials, Supplies & Cutting Diagram
- Clarification: The materials list indicates #6 x 1 1/2" screws. 1 1/4" screws are generally standard for 3/4" material, but for this project, 1 1/2" will work. The longer screws can provide some extra thread/holding power in the cedar used for the table.