Updates & Revisions

Here you will find important updates and revisions to the articles and plans published in Woodsmith magazine.

Woodsmith Issue 109 cover image

February 1997
Issue 109

Corner Computer Desk
Page 12: Figure 9 (mislabeled as 8)
Figure 9 is mislabeled as Figure 8. Illustration is missing some information. The hole for the knock-down fitting should be 7/16" deep.
Page 13: Materials List
Item R (Dividers) measurement printed as 3/4 x 5/8 – 38 but should be 1/4 x 5/8 – 38. Item U – Edging measurement is printed as 3/4 x 3/4 – 64 but should be 3/4 x 3/4 – 65.
Page 13: Cutting diagram
The plywood sheet for cutting pieces A, B, C, and O indicated as 48" x 72" but should be 48" x 96".
Desk Extension Wing
Page 16: Exploded view illustration
Left / top area of desk has a label out of place. Label showing measurement 4 1/4" has an arrow that should be indicating measurement from back edge, not from edge of laminate.
Page 16: Figure 5, detail a.
Groove depth indicated as 1/4" but should be 5/16".
Page 17: Materials List
Item B (End Edging) measurement printed as 1 1/2 x 2 1/2 – 19 but should be 1 1/2 x 2 3/8 – 19.
Page 17: Cutting diagram
Diagram for cutting pieces R and S label should be: 1/2" x 5 1/2" - 36" Hardwood (1.4 sq. ft.)