Updates & Revisions
Here you will find important updates and revisions to the articles and plans published in Woodsmith magazine.
- Oak Rocking Chair
- Page 11: Figure 14
- Measurement on left side of illustration is out of place. As printed, it says 8" from top down to indicated line. It should be 8" from bottom up to indicated line.
- Page 7: Cutting Diagram
- Clarification: The materials list indicates 5 back slats (part B) but the cutting diagram shows only 3. This is because the cutting diagram is showing blanks; you cut 2 slats from each blank and use the best 5, per the instructions on page 8.
- Page 7: Overall dimensions
- The width of the chair should be 28", not 25" as originally printed.