Online Extras & Sources

Step Back Cupboard

You'll need just a few pieces of hardware to build the stepback cupboard on page 34. The H-hinges (01X35.80) and cabinet latch (01X39.10) came from Lee Valley. The square finish nails (N-5) and headless cut brads (1 1?2") were purchased from from Horton Brasses.

The case was finished with two coats of General Finishes’ Seal-a-Cell. After lightly sanding through the finish on the corners and edges to simulate wear, a coat of General Finishes' Gel Stain (Java) was applied as a glaze.

The beadboard was painted with two colors of General Finishes Milk Paint (Somerset Gold and Antique White). After lightly sanding through the top layer of paint in a few spots, I applied a coat of General Finishes' Glaze (Yellow Ochre).

Sources

Get a FREE Preview Issue and FREE Book!