Online Extras & Sources

Gathering Table

Aside from the commonly available screws, nuts, and washers, the hardware for the gathering table on page 24 came from Rockler. This includes the figure-8 fasteners (21650) and the hanger bolts (24448).

The base of the table was stained with General Finishes' Gel Stain (Java). Then the entire table was finished with a couple coats of spray lacquer.

For the two Designer’s Notebook options on page 29, we used legs purchased from Classic Designs by Matthew Burak (303-LV36 and 304-B36). To rout the profile on the edge of the classic table, we used a thumbnail profile bit (8559) from MLCS.

Sources

Get a FREE Preview Issue and FREE Book!